Installation Instructions; Pan & Tilt Adjustments - Eneo IPD-65M2713P5A Quick Installation Manual

CAUTION: In the case of installation with Flush/ Surface/ Tilted
mount, IP protection rating is not guaranteed.
If power/video connectors are exposed to water or rain, separate
protection shield is essential.

Installation Instructions

Open the dome cover
1. Insert wide side of the Open Tool into the lock of the dome cover.
2. Hold the dome housing with one hand and turn the Open Tool until the dome
cover is sufficiently open.
3. Once the dome base and the dome cover are detached, press the edge of the
dome cover and pull it down with hands.
1
Detach the dome camera from the Easy Adaptor
Push the hook on the dome base and turn the dome base counter-clockwise. Then de-
tach the dome camera from the installed Easy Adaptor.
2
1
Pan & Tilt adjustments
1. Pan limit: Pan is limited to +/- 165°. Do NOT force to rotate the gimbal over the
limit to prevent from the internal damage.
2. Tilt limit: Tilt is limited to 25° min ~ 90° max. with reference to the ceiling when
the inclination of camera module is 0°, that is, the image is aligned horizontally.
8
2
3