Rear Assembly (Hscu300R) - Sony HSCU300RF Service Manual

4-15.

Rear Assembly (HSCU300R)

Preparation
1. Remove the top cover. (Refer
2. Remove the DM-152 board. (Refer to
Procedure
1. Remove the four screws and lift up the A side and then detach the center frame.
Note
When removing the center frame, be careful not to damage the harnesses in the A side.
PSW3 x 6
2. Disconnect the two flexible flat cables from the two connectors (CN011, CN012) on the CN-3662 board.
3. Disconnect the two harnesses from the two connectors (CN014, CN015) on the CN-3662 board.
HSCU300RF/HSCU300R
to"4-2. Top Cover")
"4-5. DM-152 Board
Center frame
Holes
(HSCU300R)")
A side
4-23