Rear Assembly (Hscu300Rf) - Sony HSCU300RF Service Manual

4-16.

Rear Assembly (HSCU300RF)

Preparation
1. Remove the top cover. (Refer
2. Remove the SDP-19 board. (Refer to
Procedure
1. Disconnect the two flexible flat cables from the two connectors (CN011, CN012) on the CN-3662 board.
2. Disconnect the two harnesses from the two connectors (CN014, CN015) on the CN-3662 board.
3. Disconnect the harness from the connector (CN1300) on the DPR-361 board.
4. Disconnect the harness from the connector (CN002) on the FL-379 board.
Harness
CN002
FL-379 board
Flexible flat cables
5. Remove the three screws (2.6 x 5).
6. Remove the two connector screws.
HSCU300RF/HSCU300R
to"4-2. Top Cover")
"4-6. SDP-19 Board
Harnesses
Harness
CN014
CN015
DPR-361 board
(HSCU300RF)")
CN1300
CN012
CN011
CN-3662 board
4-26