Optical Multi Cable Assembly (Hscu300Rf) - Sony HSCU300RF Service Manual

4-19.

Optical Multi Cable Assembly (HSCU300RF)

Preparation
1. Remove the top cover. (Refer to
Procedure
1. Open the reuse clamp.
2. Disconnect the harness and the two optical cables from the two connectors (CN300, CN301) on the SDP-19
board.
3. Disconnect the harness from the connector (CN002) on the FL-379 board.
Harness
CN002
(FL-379 board)
Note
• Carefully handle optical cables because they are likely to be damaged.
• Do not touch portion A of the optical cable with your bare hands.
4. Remove the screw (PSW3 x 6) to detach the cap plug terminal.
HSCU300RF/HSCU300R
"4-2. Top Cover")
Reuse clamp
Optical cables
Harness
Portions A
CN300
SDP-19 board
CN301
4-32