Operation - Yardworks CBV48BCU.9 Instruction Manual

model no. 060-3095-2 | contact us: 1.866.523.5218

OPERATION

BEFORE PUTTING INTO OPERATION
1. CHARGING THE BATTERY (SEE FIG. B)
a. The battery pack (not included) must be fully charged before first use.
b. If the battery pack is very hot you must remove your battery pack from the charger and
allow your battery pack to cool first to ambient temperature and then recharging can
be started.
c. To prevent damage to the battery pack, when charge runs out, please charge the
battery to reach full or no less than half charge before storage.
d. If the tool will not be used for long periods of time, charge the battery pack every 3-6
months.
CHARGING PROCEDURE
1) Plug the charger (not included) into an appropriate outlet.
2) Slide the battery pack into the charger, and make sure the battery is in the correct
charge position firmly. The light will begin flashing green to indicate the charging
process has started.
3) When charging is completed, the light will turn solid green.
4) After the battery is fully charged, unplug the charger and remove the battery pack.
NOTE: If the battery pack is locked in the charger, press the battery pack release button
and remove it.
A1
B
WARNING! The charger and battery pack are specially designed
1
to work together so do not attempt to use any other devices. Never
insert or allow metallic objects into your charger or battery pack
connections because an electrical failure and hazard will occur.
WARNING: When battery charge runs out after continuous use or
exposure to direct sunlight or heat, allow time for the tool to cool
down before re-charging to achieve the full charge.
C1
A2
2
C2
2
1
13