Linak LA18 IC Advanced User Manual page 10

The RoHS mark is only applicable for the end product. Therefore, it must be obtained by the manufacturer of the
end products. LINAK can, however, supply the required material information on our products.
®
For more information, visit: https://www.linak.com/about/declarations/
or contact: chemicalcompliance@linak.com
Declaration of confirmity
Herewith declares that LINAK DESKLINE
LA18: 18040aaa0C0b0B10-deA11fffggh00
(Where - aaa can be between 36 and 300; b can be 0 or K; - d can be 1 or 6; e can be 1 or 2; fff can be between 218
and 370; gg can be A1, A2, A3, B1, B3, B5, S2 or S4; h can be 0, C or X)
Complies with RED Directive: 2014/53/EU according to following standards:
EN 62479:2010, EN 62368-1:2014/A11:2017, ETSI EN 301 489-1 V2.2.3 (2019-11), Draft ETSI EN 301 489-17
V3.2.2 (2019-12) and ETSI EN 300 328 V2.2.2 (2019-07)
Complies with RoHS2 Directive 2011/65/EU according to the standard:
EN 50581:2012
Use the LA18 in an environment with temperature between -10 to +40 °C. Otherwise, the LA18 may be damaged.
It can be operated at altitudes up to 2000 m.
Hereby, LINAK A/S declares that the radio equipment type LA18 is compliant with Directive 2014/53/EU.
Operating Frequency Range
Bluetooth 2402 - 2480 MHz
DECLARATION OF CONFORMITY
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
® products as characterized by the following models and types:
The maximum RF Output Power
7.59 dBm EIRP
Page 10 of 27