Adjusting The Cutterbar - SaMASZ KDT 180 Operator's Manual

CAUTION:
During work, please pay particular attention to mower's shaking. If it
happens, it means that the disc (discs) works only with one knife. In that
case long-lasting mowing will cause serious damage of the cutterbar.
CAUTION:
When replacing knives the engine must be stopped and the cutterbar must
lie on the ground. PTO shaft must be disconnected.
Fig. 17. Quick replacing of the knives with mounting lever.

6.3. Adjusting the cutterbar

Different swath widths can be reached by replacing discs without the forming drums with discs with
the forming drums, or by putting additional ones. They must be ordered separately. Swath width is
also regulated by swath discs.
Fig. 18. Swath widths of SaMASZ disc mowers. By combining discs and forming drums, different
swath widths can be reached.
Operator's manual
- 24 -
Rear disc mowers
KDT 180;KDT 220 S/W;KDT 260 S/W;
KDT 300;KDT 340
Disc with the forming
Disc without the forming
drum
drum