Table of Contents
Advertisement
Quick Links
OPERATING MANUAL
MEDIUM DUTY SNOW PLOWS:
PSV 161
PSV 181
PSV 201
PSV 231
PSV 271
PSV 301
The original instruction
Poland, 15-161 Białystok, ul.Trawiasta 15
Established – 1984
PSV 231 Up
PSV 271 Up
PSV 301 Up
PSV 231 Up (H)
PSV 271 Up (H)
PSV 301 Up (H)
tel. (+48) (85) 654 70 31
fax (+48) (85) 664 70 41
e-mail: samasz@samasz.pl
www.samasz.pl
IN202EN002
2012.10.09
VERSION 2
Advertisement
Table of Contents
Related Manuals for SaMASZ PSV 161
Summary of Contents for SaMASZ PSV 161
- Page 1 Established – 1984 tel. (+48) (85) 654 70 31 fax (+48) (85) 664 70 41 e-mail: samasz@samasz.pl www.samasz.pl OPERATING MANUAL MEDIUM DUTY SNOW PLOWS: PSV 161 PSV 231 Up PSV 181 PSV 271 Up PSV 201 PSV 301 Up PSV 231...
- Page 2 This operating manual is an indispensable part of every snow plow and aims to familiarize the user with the rules of proper operation and utilization of the device as well as the dangers inherent in its use. Before starting up the machine for the first time carefully read this operating manual and all safety advice.
-
Page 3: Table Of Contents
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 1. IDENTIFICATION ......................... 2 2. SAFETY CONDITIONS ......................3 2.1 Safety rules .......................... 3 2.2 Warning signs ........................4 2.3 Warnings and prohibitions ....................5 3. INTENDED USE AND CONSTRUCTION ................6 3.1. -
Page 4: Identification
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 1. IDENTIFICATION Every snow plow can be clearly identified using the identification plate which is permanently attached to the suspension body, as is shown below (Fig. 1 and Fig. 2). Fig. -
Page 5: Safety Conditions
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 2. SAFETY CONDITIONS ATTENTION! Only personnel familiar with this operating manual may operate the snow plow. Every operator of the plow should be fully aware of existing dangers and should know how to avoid those dangers. -
Page 6: Warning Signs
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 2.2 Warning signs ATTENTION! Always observe the instructions on warning signs on the plow which warn of dangers. ATTENTION! All warning labels should be clean and legible. In the event of loss or damage of labels they should be replaced. Labels can be purchased from the manufacturer. -
Page 7: Warnings And Prohibitions
2.3 Warnings and prohibitions ATTENTION! Even though the manufacturer of the plow SaMASZ Sp. z o. o. Bialystok, in order to eliminate danger, assumes responsibility for the design and construction of its plows, some elements of risk (so called residual risk) are unavoidable during plow use. -
Page 8: Intended Use And Construction
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H PROHIBITIONS! Remember the following prohibitions during snow plow operation. Operation of the plow under the influence of alcohol, drugs or medications which reduce motor skills is forbidden. Operation of the plow by unauthorized or untrained personnel is forbidden. Using the plow for activities other than those described in the operating manual is forbidden. - Page 9 Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H Construction of the PSV plow A. – Mount*. G. – Rotational actuator. B. – Suspension system. H. – directional valve, C. – Right moldboard. I. – Support leg. D.
-
Page 10: Equipment And Spare Parts
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H Construction of the PSV Up (H) plow Spring mechanism of the plowshare G. – Suspension system. A. – B. – Rotational actuator H. – directional valve. C. – Right moldboard. I. -
Page 11: Plow Operation
PSV, PSV Up, PSV Up H ATTENTION! Use only original equipment and spare parts from the SaMASZ Company. Parts from an unknown source or home made are less durable and have a negative influence on the operation of the plow and work safety. - Page 12 Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H Frame PSV cat. I/II Frame PSV with unattached lugs EURO Plate PSV for Frame PSV development In order to mount the plow on the tractor: approach the plow so that the lower lifting arms of the three point hitch are inserted into the mountings of the plow's suspension, secure the mounting using pins and cotter pins, connect the upper part of the suspension system using a regulated tie and secure them with a...
- Page 13 Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 5.1.2. Mounting PSV Up plows on a truck/tractor In order to mount PSV Up plow on truck/tractor the following should be performed (Fig. 7): install control panel, plug in power plug to lighter's connector, connect hydraulic hoses to vehicle, it is recommended to retract both cylinders responsible for shields' shifting (item.
- Page 14 Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H set switch in WORK position and pay special attention as in such position the hitch falls down freely, what may cause bodily injury, upon mounting of the hitch on DIN linkage, protect the connection with two M27 bolts (Fig. 8), install control panel, put hydraulic power supply cover on.
-
Page 15: Plow Control
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 5.2. Plow control 5.2.1. PSV plow control After connecting the hydraulic system and the power plug, take the control switch and cable into the tractor's cabin and insert the plug into the 12 V cigarette lighter outlet (Fig. 10). In order to lift/lower the plow we use the control lever of the front TPH of the tractor. - Page 16 Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 5.2.3. PSV Up H plow control Plow’s independent hydraulic assembly consists electric pump and three control cylinders. Turning cylinders are equipped with hydraulic batteries, which protect the plow against hitting obstacles.
-
Page 17: Transport And Parking Positions Of The Plow
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 5.3. Transport and parking positions of the plow 5.3.1. Transport and parking positions of the PSV plow During PSV plow transport it should be lifted and prevented from lowering on its own (ex. -
Page 18: Preparing The Plow For Operation
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H Fig. 16. The PSV Up H plow in a) parking position, b) transport position Fig. 17. The PSV Up plow in a) parking position, b) transport position 5.4. Preparing the plow for operation After correctly mounting the plow on the tractor it should be inspected and it should be determined if the plow has worn blade inserts, bumpers or loose bolts. - Page 19 Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H Fig. 19. Basic operating positions of the PSV Up (H) plow, a) plowing the snow right, b) plowing the snow left c), e) moving the snow, d) plowing the snow to both sides simultaneously For PSV Up (H) Plow transport and operation dsimount support legs (S) as provided on Fig.
-
Page 20: Operation
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 5.5. Operation ATTENTION! During plowing the driving speed should be appropriate to existing road conditions. During plowing driving faster than 25 km/hr is forbidden. The PSV, PSV Up (H) plows are medium duty plows which are capable of withstanding snow pressure of up to 6 tons. - Page 21 Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H the fourth system is the patented construction of the mount which protects the plow from pressure greater than 6 tons and from sudden collisions with an immovable obstacle. It works by absorbing the energy of the collision through partial or complete breaking of the 8 M10 class 8.8 bolts, and through the plastic deformation of the mount pressure plates (Fig.
-
Page 22: Operational Maintenance
Fmax up to 3.5 Tons Fmax up to 1.5 Tons In plows with working widths less than 2.7 m (PSV 161, PSV 181, PSV 201, PSV 231) the permissible load is F = 4 tons. Tab. 5. Approximate force F... -
Page 23: Maintenance And Storage
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H After 5 work hours: check the condition of blade inserts, check the condition of mount securing bolts and replace if necessary, when installed adjust the height of support wheels or skids if necessary. After finishing work: carefully clean and wash the plow, Tab. -
Page 24: Technical Characteristics
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 9. TECHNICAL CHARACTERISTICS Tab. 7. General characteristics of medium duty snow PSV plow Plow type PSV 161 PSV 181 PSV 201 PSV 231 PSV 271 PSV 301 Working width... -
Page 25: Environment
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 10.3. Environment the snow plow is fully environmentally friendly materials of the plow are in 95% recyclable. packing materials of the plow are 100% recyclable. worn-out plow parts and packaging should be recycled according to local recycling regulations. during the entire lifetime of the plow please be careful not to allow the oil to leak out of the hydraulic system which could cause contamination of the natural environment. -
Page 26: Warranty Conditions
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 11.2. Warranty conditions 1. The manufacturer guarantees the quality and proper function of the snow plow covered by this warranty if the use of the snow plow is in accordance to the operating manual. 2. -
Page 27: Record Of Warranty Repairs
Tractor mounted snow plow Operating manual PSV, PSV Up, PSV Up H 11.3. Record of warranty repairs Repairs performed and replaced parts: Date, seal and signature of the person performing the repair. Date, seal and signature of the person performing the repair. Date, seal and signature of the person performing the repair. - Page 28 Page 1 of 2 Białystok, 2013.10.07 ERRATA Subject: controlling plows AlpS, PSV, City – standard and optional control panel 5.2.1. Standard control: CAUTION: Prior to mounting plow make sure that polarity of aggregated machine is the same as driver's (Fig. 1). Wrong polarity will cause damage to the driver. Fig.
- Page 29 Page 2 of 2 5.2.2. Optional control: In case of AlpS plows there is possibility, on individual request, to install a 5-button control panel as provided on Fig. 3 which cooperates with a 3-cartridge valve (Z – Fig. 3). Power ON/OFF Fig.