Presetting Disc Names - Kenwood KDC-6060R Instruction Manual

Disc control features
Preset t ing D isc N am es
Store the names of discs to be displayed w hen played.
1
Play the disc w hose name you w ant to preset.
N OTE
• This function is not available for disc changers that do not feature
the Disc Name Preset function.
• This procedure is not to be used to store the disc and track
titles for M Ds that you record.
2
Hold dow n the NAM E.S button for tw o seconds or more.
"NAM E SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position w here character input can be
made.
3
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
You can also move the cursor left or right by pressing the
+ –
TRACK or TRACK buttons, respectively, on the remote
control.
4
Each time the 38 button is pressed, the characters to be
entered change as listed below .
+ –
Press the DISC or DISC
character.
Characters that can be displayed are as follow s.
Alphabet (capital letters) : A~ Z
Numerals/characters : 1~ 9 0 @ " ' ` % & ∗ + - = , . / \ < > [ ]
N OTE
The operation and characters that can be entered may change
as listed below , depending on the unit that is connected.
A press of the 38 button exits the disc name preset mode.
Operations can be follow ed again from Step 2 at a time such
as this, and the characters to be input are selected using the
procedure described below .
(See page 7)
button to display the desired
+
Press the DISC or DISC
character. Besides the alphabet (capital letters only) and
numbers, you can choose the follow ing characters: /, + , –, * ,
= , < , > , [ and ].
N OTE
Direct Alphabet Input
If the disc changers that w ere manufactured and sold after 1997
are connected, you can directly input letters using the
number/letter entry buttons on the remote control.
Example: Use the follow ing table to enter the name "DANCE".
Character Button to press
" D"
" A"
" N"
" C"
" E"
5
Continue steps 3 and 4 until all the characters are chosen for
the name.
N OTE
You can enter up to 8 characters for each name.
6
Press either the NAM E.S
button on the remote control.
The disc name is stored and the disc name preset mode is
cancelled.
If you make no entry in a 10-second period, the name w ill be
stored w ith the characters entered so far.
— 28 —
–
button to display the desired
# Times pressed
#3 1
#2 1
#6 2
#2 3
#3 2
button on the main unit or the OK