Connecting Cables To Terminals - Kenwood KDC-6060R Instruction Manual

Connect ing Cables t o Term inals
Connector Function Guide
Pin Numbers for
Cable Colour
ISO Connectors
External Pow er
Connector
A–4 Yellow
A–5 Blue/White
A–6 Orange/White
A–7 Red
A–8 Black
Speaker
Connector
B–1 Purple
B–2 Purple/Black
B–3 Gray
B–4 Gray/Black
B–5 White
B–6 White/Black
B–7 Green
B–8 Green/Black
A–4 Pin
Functions
Battery
Pow er Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
+
Rear Right ( )
–
Rear Right ( )
+
Front Right ( )
–
Front Right ( )
+
Front Left ( )
–
Front Left ( )
+
Rear Left ( )
–
Rear Left ( )
Battery cable (Yellow )
Ignition cable (Red)
A–7 Pin (Red)
(Yellow )
8 6
Connector A
7 5
8 6
Connector B
7 5
FM /AM antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO) (Accessory
KENWOOD disc changer/DAB control input
N OTE
To connect the Disc changer or DAB unit, consult each manual.
Rear left output (White)
Rear right output (Red)
Fuse
Wiring harness
(Accessory 1 )
TEL mute cable (Brow n)
TEL M UTE
Pow er control/ M otor antenna
control cable (Blue/White)
P.CONT.OUT
4 2
If no connections are made, do
3 1 not let the cable come out from
the tab.
4 2
3 1
— 38 —
4 )
Connect to the terminal that is grounded w hen
either the telephone rings or during
conversation.
N OTE
To connect the KENWOOD navigation
system, consult your navigation manual.
Connect either to the pow er control terminal
w hen using the optional pow er amplifier, or to
the antenna control terminal in the vehicle.