Presetting Disc Names - Kenwood KRC-PS959R Instruction Manual

Disc control features
Preset t ing D isc N am es
Store the names of discs to be displayed w hen played.
1
Play the disc w hose name you w ant to preset.
N OTE
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
• This procedure is not to be used to store the disc and track
titles for M Ds that you record.
2
Press the NAM E.S button for at least tw o seconds.
"NAM E SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position w here character input can be
made.
3
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
You can also move the cursor left or right by pressing the
+
TRACK or TRACK
control.
4
Each time the 38 button is pressed, the characters to be
entered change as listed below .
Press the DISC
character.
Characters that can be displayed are as follow s.
Alphabet (upper case): A ~ Z
Alphabet (low er case): a ~ z (KRC-PS959R Only)
Numerals and symbols: 1~ 9 0 @ " ' ` % & ∗ + - = , . / \ < > [ ]
Special characters: á à é è í ì ó ò ú ù Ñ Ç ® ß ‹ fl â ä ê ë
N OTE
The operation and characters that can be entered may change
Downloaded from: http://www.usersmanualguide.com/
(See page 7)
–
buttons, respectively, on the remote
+ –
or DISC button to display the desired
î ï ô ö û ü ñ ç © Æ › fi
(KRC-PS959R Only)
as listed below , depending on the unit that is connected.
A press of the 38 button exits the disc name preset mode.
Operations can be follow ed again from Step 2 at a time such
as this, and the characters to be input are selected using the
procedure described below .
+
Press the DISC or DISC
character. Besides the alphabet (capital letters only) and
numbers, you can choose the follow ing characters: /,
= , < , > , [ and ].
N OTE
Direct Alphabet Input
If the disc changers that w ere manufactured and sold after 1997
are connected, you can directly input letters using the
number/letter entry buttons on the remote control.
Example: Use the follow ing table to enter the name "DANCE".
Character Button to press
" D"
" A"
" N"
" C"
" E"
5
Continue steps 3 and 4 until all the characters are chosen for
the name.
6
Press either the NAM E.S button on the main unit or the OK
button on the remote.
The disc name is stored and the disc name preset mode is
canceled.
If you make no entry in a 10-second period, the name w ill be
stored w ith the characters input so far.
N OTE
• The number of characters and discs w hose names can be
stored w ill differ depending on the disc changer that is
connected. Please see your disc changer manual for details.
• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name w ill be
displayed for it, too.
• If you w ant to change the name of a disc, repeat steps 1 and 2
— 26 —
–
button to display the desired
# Times pressed
#3 1
#2 1
#6 2
#2 3
#3 2
+ – , ∗ ,
,