Auto M Emory Entry; Direct Access Tuning - Kenwood KDC-6060R Instruction Manual

Tuner features
(See page 6)
A ut o M em ory Ent ry
You can automatically store all the receivable frequencies in
the band currently being listened to, and then recall them w ith
the touch of a button later. This function is especially useful
w hen you are travelling and do not know w hat stations are
available. Up to 6 frequencies can be stored this w ay.
1
Select the band for auto memory entry.
2
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed and the menu mode is turned on.
3
Press the ¢ button repeatedly until "A-M EM ORY" appears in
the display.
Press the 4 button to search in the other direction.
4
Hold dow n either the AM button or FM button for tw o seconds
or more to start auto memory function.
The numbers of the preset station buttons show ed in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
N OTE
• When the AF function is turned on w hilst auto memory entry
takes place, only RDS stations (i.e., stations w ith RDS
capability) are stored. RDS stations that have been preset for
FM 1 cannot also be preset in FM 2 or FM 3.
• When the local seek function is turned w hilst auto memory
entry takes place, stations w ith poor reception are not stored.
• When the Traffic Information function is on , only the local
traffic information station frequency w ill be stored.
Cancelling Auto M emory Entry During Its Operation:
Press the M ENU button w hilst auto memory entry is taking
place to stop the process.
Function of rem ote control w ith num ber/letter entry buttons
D irect A ccess Tuning
When you already know the frequency of the station that you
w ant to listen to, you can enter it directly for quick access.
(Function of remote control)
1
Select the band by pressing the FM or AM button.
2
Press the DIRECT button.
The frequency part of the display blinks for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically cancelled.
3
Enter the frequency of the desired station w hilst the display is
blinking.
If you w ant to listen to an FM station at 92.1 M Hz, for
example, press 0, 9, 2, and 1.
If you w ant to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0.
N OTE
• When a frequency w hich cannot be received is input, this
frequency is not verified and operation returns to the original
frequency input mode.
• FM frequencies can only be input in 0.1 M Hz steps, and not in
0.01 steps.
Cancelling Direct Access Tuning:
Press the DIRECT button again.
— 14 —
(See page 8)