Presetting Disc Names - Kenwood KDC-3011 Instruction Manual

nglis
[nore]
CD/External disc control features
Function of the KDC-3011
Presetting Disc Names (Function of disc changers)
Store the names of discs to be displayed when played.
1 Play the disc whose name you want to preset.
¢ This function is not available for disc changers that do not
feature the Disc Name Preset function.
* This procedure is not to be used to store the disc and track titles
for MDs that you record.
2 Press the NAME.S button for at least two seconds.
"NAME SET' is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
3 Press either the ke or BRI button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the >
button to the right.
You can also move the cursor left or right by pressing the
TRACK+ or TRACK-— buttons, respectively, on the remote
control.
4 Press the DISC+ or DISC- button to display the desired
character.
Characters that can be displayed are as follows.
Alphabet (upper case) :A~
Numerals and symbols :1~90@"'*%&*+-=
The operation and characters that can be entered may change
as listed below, depending on the unit that is connected.
Press the DISC+ or DISC— button to display the desired
character.
_Besides the alphabet (capital letters ae and numerals,
"can choose the following characters: /, + © =, <5>, arid 1.
5 Continue steps 3 and 4 until all. the sharactars are chosen for
the name.
»N<>T)
You can enter up to eight characters for each name.
6 Press either the NAME.S button on the main unit or the OK
button on the remote. ;
The disc name is stored and the disc name preset mode is
canceled.
If you make no entry in a 10-second period, the name will be
stored with the characters input so far.
¢ The number of discs whose names can be stored will differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
¢ Discs are identified by their total length and number of tracks. If .
another disc happens to have the same specifications as one."
that you have already stored a name for, the name will be Hot
displayed for it, too.
¢ lf you want to change the name of a disc, repeat steps 1 and2 |
to display the name, and then repeat steps 3 and 4 to enter the
changes.
¢ Pressing the reset button does not erase the disc names stored
in a disc changer.
a 20 —