Related Manuals for Kenwood KDC-6060R
Summary of Contents for Kenwood KDC-6060R
- Page 1 KDC-6060R KDC-5060R CD-RECEIVER INSTRUCTION MANUAL COMPACT DIGITAL AUDIO © B64-1077-00 (EW)
-
Page 2: Table Of Contents
Contents Before use Safety precautions ...3 Handling Compact discs...5 Buttons and Display Basic operations...6 Tuner features...6 RDS features...7 Disc control features ...7 Other features...8 Remote control ...8 Basic operations Power...9 Switching Modes ...9 Volume ...9 Attenuator ...9 Loudness ...9 Menu System...10 Tuner features Selecting Tuning Mode ...12 Tuning ...12... -
Page 3: Safety Precautions
• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. - Page 4 • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. DISC LOUD SCAN D.SCN...
-
Page 5: Handling Compact Discs
Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs •... -
Page 6: Buttons And Display Basic Operations
Buttons and Display Basic operations uA T T LOUD SCAN D.SCN M.RDM ATT / LOUD for KDC-6060R LOUD indicator ATT indicator LOUD AUTO for KDC-5060R LOUD indicator LOUD ATT indicator Tuner features SRC / ¢ PWR OFF DISC VOL ADJ... -
Page 7: Rds Features
RDS features LOUD SCAN D.SCN M.RDM #1~6 VOL ADJ for KDC-6060R TA indicator TI indicator NEWS TEXT TP REG AUTO TEXT indicator indicator TP indicator for KDC-5060R TA indicator NEWS indicator NEWS LOUD TP indicator REG indicator TI indicator Disc control features ¢... -
Page 8: Other Features
#0~9 DISP/TEXT AUDIO NAME.S AUDIO /MENU TUNE ¢ TRACK TUNE TRACK DISC indicator DISC CHANGER AUTO indicator — 8 — Optional for the KDC-6060R TUNER TUNER TAPE DIRECT – DIRECT CD·MD – DNPP – TUNE TRACK VOL. PROG – –... -
Page 9: Basic Operations Power
Basic operations (See page 6) Power Turning on the power: Press the SRC button. NOTE Turn the power on before carrying out the following procedures. Turning off the power: Hold down the PWR OFF button for one second or more. Switching Modes Switching Modes: Each time you press the SRC button, the mode switches as... -
Page 10: Menu System
ATPS ON <Except in AM band> Monaural Reception MONO OFF <In FM reception of Tuner mode> Text Scroll SCL MANU <In CD (KDC-6060R only) or Disc changer mode> — 10 — each function (display) CLK OFF SYNC OFF DSI OFF... - Page 11 NOTE • Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function.
-
Page 12: Tuner Features
Tuner features (See page 6) Selecting Tuning Mode You can choose from three tuning modes: auto seek, preset station seek, and manual. The “AUTO1” indicator lights up when auto seek tuning is selected, and the “AUTO2” indicator lights when preset station seek tuning is selected. Hold down the MENU button for one second or more. -
Page 13: Local Seek Function
Local Seek Function With the local seek function turned on, auto seek tuning skips stations with relatively poor reception. Turning Local Seek Function On/Off: Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Press the ¢... -
Page 14: Auto Memory Entry
Tuner features (See page 6) Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. -
Page 15: Preset Station Seek With Programme Service Name
Function of remote control with DNPP button Preset station seek with Programme service name You can search for the preset station with Programme Service name. Press the DNPP button on the remote control. “SNP PLAY” will be displayed once the seek mode is entered. The names of the stations preset in the band currently listened to are displayed for 5 seconds each. -
Page 16: Rds Features Rds (Radio Data System)
RDS features (See page 7) RDS (Radio Data System) RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received. -
Page 17: Restricting Rds Region (Region Restrict Function)
Restricting RDS Region (Region Restrict Function) You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. When the Region Restrict Function is on, the region is restricted and the REG indicator is turned on. Turning Region Restrict Function On/Off: Hold down the MENU button for one second or more. -
Page 18: Auto Tp Seek Function
RDS features (See page 7) Auto TP Seek Function When the TI function is on and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. This function is on, when unit is first powered on. -
Page 19: News Bulletin Function With Pty News Timeout Setting
News Bulletin Function with PTY News Timeout Setting You can arrange to have news bulletins interrupt your current listening source, including other radio stations. When the News Bulletin function is on, the PTY News Timeout setting allows you to set the interval during which further news interruption cannot take place. -
Page 20: Programme Type (Pty) Function
RDS features (See page 7) Programme Type (PTY) Function Conduct auto seek tuning only on those stations with selected kinds of programmes. Press the 38(PTY) button. “PTY” is displayed, and the Programme Type Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode will automatically turn off. -
Page 21: Disc Control Features Playing Cds
Disc control features (See page 7) Playing CDs Playing CDs: A press of the release button causes the faceplate to drop to the front, thereby exposing the CD slot. Holding the CD with the labeled side facing up, insert it in the slot. -
Page 22: Playing Other Disc Mode
Disc control features (See page 7) 7 When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit. Set the O-N switch to "N". "N"-operation will be set. 7 When a unit that is not equipped with an O-N switch, or the changer switching unit "KCA-S200"... -
Page 23: Fast Forwarding And Reversing Disc Play
Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point. NOTE You cannot use reverse play between tracks model being connected. -
Page 24: Track/Disc Repeat Function
Disc control features (See page 7) Track / Disc Repeat Function Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : Track Repeat ON Disc Repeat ON (Function of disc changers) Track/Disc Repeat OFF... -
Page 25: Random Play Function
Random Play Function Play all the tracks on the current disc in random order. Press the RDM button to switch the random play function on and off. The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. -
Page 26: Switching Display For Discs
Disc control features (See page 7) Switching Display for Discs Switch the display that appears whilst discs are playing. Switching Display for Discs: Each time you press the DISP button, the display during disc play switches as follows. Track time Total disc playing time (CD only) Disc name Disc title... -
Page 27: Direct Track Search
Function of remote control with number/letter entry buttons Direct Track Search Using the remote control, make direct input of the track number that you want to listen to. Using the numeric buttons on the remote control, enter the number of the track that you want to listen to. The selected track number blinks in the display for 10 seconds. -
Page 28: Presetting Disc Names
Disc control features (See page 7) Presetting Disc Names Store the names of discs to be displayed when played. Play the disc whose name you want to preset. NOTE • This function is not available for disc changers that do not feature the Disc Name Preset function. -
Page 29: Disc Name Preset Play (Dnpp)
NOTE • The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. Up to 10 CDs can be registered with this unit. • Discs are identified by their total length and number of tracks. If you play another CD that happens to have exactly the same specifications as another CD whose name is stored, the wrong name will be displayed for it. -
Page 30: Other Features
Other features (See page 8) Audio Control Setting Adjust various parameters of sound quality. Press the AUDIO button to enter the control mode. Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM button advances the display, and pressing the AM button reverses it. -
Page 31: Tel Mute Function
The original source (i.e., the one used before the phone call) is returned to automatically, and the volume restored gradually. Navigation Mute Function When the KENWOOD Navigation System is connected, an interruption of the audio guide results in the temporary lowering of the audio level. -
Page 32: Switching Clock Display
ON" or "BEEP OFF" display of the various modes. is on or — 32 — Function of the KDC-6060R Switching Graphic appears in the display. "GRAP ON" or "GRAP Graphic display is on or off,... -
Page 33: Adjusting Time
Adjusting Time With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also set the time manually if the automatic time adjustment function is turned off. -
Page 34: Theft Deterrent Faceplate
Other features (See page 8) Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing Faceplate: Press the release button and drop open the faceplate. In its dropped condition, while drawing the faceplate to one side, pull it to the front and remove it. -
Page 35: Basic Operations Of Remote Control
Basic operations of remote control Optional for the KDC-6060R 2CAUTION Do not set the remote control on hot places such as above the fascia panel (dashboard). Replacing the Lithium Battery: Use one lithium battery (CR2025). Remove the case following the instructions as illustrated. - Page 36 Basic operations of remote control Optional for the KDC-6060R Tuner Mode • Number/ letter entry buttons Press buttons #1-6 to recall preset stations. During direct access tuning, use these buttons to input the frequency of the station. • TUNE buttons Press the 4 button to make decreasing seeks (using the preset tuning mode).
-
Page 37: Accessories
2CAUTION • If your car is not prepared for this special connection-system, Number of items consult your KENWOOD dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all cable connections are securely made by inserting jacks until they lock completely. -
Page 38: Connecting Cables To Terminals
Connect to the terminal that is grounded when either the telephone rings or during TEL MUTE conversation. NOTE To connect the KENWOOD navigation system, consult your navigation manual. Connect either to the power control terminal when using the optional power amplifier, or to P.CONT.OUT... -
Page 39: Installation
2WARNING Connecting the ISO Connector (see p.38) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. - Page 40 Installation Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Lock Accessory2 Removal tool When the lower level is removed, remove the upper two locations.
-
Page 41: Troubleshooting Guide
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM The power does not turn on. The fuse has blown. - Page 42 Troubleshooting Guide PROBLEM A CD ejects as soon as it is The CD is upside-down. loaded. The CD is quite dirty. The sound skips on a CD. The CD is scratched or dirty. The specified track does not Random play has been selected. play.
- Page 43 The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. EJECT Load the disc magazine properly. No CD in the unit. Insert the CD.
-
Page 44: Specifications
Specifications Specifications subject to change without notice. FM tuner section Frequency range (50 kHz Space) ...87.5 MHz – 108.0 MHz Usable sensitivity (S/N=26dB) ...0.7 µV/75 Ω Quieting Sensitivity (S/N=46dB)...1.6 µV/75 Ω Frequency response (±3.0 dB) ...30 Hz – 15 kHz Signal to Noise ratio (MONO) ...65 dB Selectivity (DIN) (400kHz)...≥...