ekwb EK-Quantum Vector Trio RTX 2080 Ti Installation Manual page 3

CONNECTING THE D-RGB LED STRIP
Plug the 3-pin connector from Water block's D-RGB LED light to the D-RGB_HEADER on the
motherboard. The LED will work if the pin layout on the header is as follows:
Please ensure that the arrow indicated on the connector is plugged into
the +5V line as indicated on your motherboard.
Failure to do so will damage your motherboard or LED strip.
REQUIRED TOOLS:
scissors
All disclosures, notices and warranty conditions are being written on the EKWB website. Please read terms of use.
Philips head screwdriver
+5V G R B
.
4mm hex socket Optional: pliers
Released on 20
th
of November, 2019. Revision 1