Total Control
Rear Panel Description - Using as a Stream Receiver
Below are the available connections on the rear of the HDA-IO:
1. DC IN: Connect the supplied 12VDC adapter to this port to power the
HDA-IO.
2. LAN: Full Duplex Gigabit LAN ONLY, for audio streaming and zone control
(Wi-Fi NOT supported, device must be hard-lined to the network).
3. 12 VDC CTRL: Mono 3.5mm connector capable of supplying 150mA of current.
2
6
4. Analog/Digital Outputs: Only one (1) of the three (3) available outputs can be
used. The HDA-IO as a stream receiver provides 3
access to audio sources streaming via HDA.
•
Analog - RCA Style
•
Toslink (Optical)
•
Digital Coax
4
3
HDA-IO
Owner's Manual
rd
party audio zones with
1