Table of Contents
Advertisement
Total Control
Rear Panel Description - Using as a Stream Injector
Below are the available connections on the rear of the HDA-IO:
1. DC IN: Connect the supplied 12VDC adapter to this port to power the
HDA-IO.
2. LAN: Full Duplex Gigabit LAN ONLY, for audio streaming and zone control
(Wi-Fi NOT supported, device must be hard-lined to the network).
3. 12 VDC CTRL: Mono 3.5mm connector capable of supplying 150mA of current.
2
5
4. Analog/Digital Inputs: Both of the following inputs can be used
simultaneously to provide two (2) HDA "high-definition" audio streams:
•
Analog - Unbalanced RCA
•
Toslink (Optical)
•
Digital Coax
4
3
HDA-IO
Owner's Manual
1
Advertisement
Table of Contents
