Front Panel Descriptions - URC Total Control HDA-IO Owner's Manual

Total Control

Front Panel Descriptions

There are three (3) LEDs on the front panel of the HDA-IO:
1. Power LED: Indicates one (1) of the following:
• Solid Blue: Power has been applied to the device and it has
successfully initialized.
• Off: Power has been removed from the device.
2
1
3
2. Status LED: Indicates one (1) of the following:
• Solid Blue: The device has been programmed with Total Control software
and is ready for operation.
• Blinking Blue: The device is receiving a download from the Total Control
programming software.
• Blinking Green: The device is receiving a firmware upgrade, this light
continues to blink until the update is fully applied.
• Off: The device has not been programmed with Total Control software.
HDA-IO
Owner's Manual