Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IDEAL Halo Combi Wi-Fi
Summary of Contents for IDEAL Halo Combi Wi-Fi
-
Page 2: Safety Information
Halo plus installation details please go to www.idealboilers.com GETTING STARTED The Ideal Halo Combi Wi-Fi is a wireless PRT that The Halo app is available to download from the is paired with the Halo Smart Interface installed in Apple App Store and on Google Play. To save time the boiler. - Page 3 A. KIT CONTENTS 1. Ideal Halo Combi Wi-Fi 2. Rear housing 3. Trim plate display unit 4. Desk stand 5. Smart Interface 6. Installation guide Model Name: Halo Combi Wi-Fi Model Qualifier: ErP Class VI I certify that the boiler is connected to an...
-
Page 4: Location Guidelines
If the distance between the Halo and Smart Interface is above 30 metres or the install location is challenging, consider using the Ideal Zigbee Booster (Product Code: 221132) or mounting the Smart Interface externally to the boiler using a bracket (Product Code: 220366). - Page 5 C. INSTALLATION OF THE HALO The Halo can be either wall mounted or desk mounted. Wall mounting the Halo If there are any concerns regarding signal strength and location of the wall mounted Halo it is advisable to pair the control (section E) and check signal strength before fixing to the wall. 2.
- Page 6 Desk mounting the Halo 1. The Halo has an integrated rear housing and desk 2. Insert the 4 AA batteries provided into the front stand. housing of the Halo. Pay close attention that the orientation of the batteries is as indicated in the housing.
- Page 7 D. INSTALLATION OF THE SMART INTERFACE To install the Halo Smart Interface into a new boiler with serial letter code AFQ (found on the data plate) follow the steps below. For further details on the compatibility of older boilers and how to install the Smart Interface into a bracket and wire into the boiler please go to www.idealboilers.com Frost stat Room stat/...
- Page 8 Blanking plate Link wire plug 5. Locate the blanking plate on the front of the boiler 6. Remove link wire plug and keep and remove carefully with a small flat bladed in a safe place. screwdriver. 7. Connect the plug on the Halo Smart Interface to 8.
- Page 9 10. Check the Smart Interface connection to the boiler 9. Switch on the boiler, the Halo Smart Interface will by pressing the Override button. The Override LED power up and begin setup, this can take up to 90 should be green and the boiler will fire. Press the seconds.
- Page 10 Sat, 17 Nov stage, if not changed this will default to the 9:33pm Ideal Boilers Customer Service number. Zigbee icon 7. The home screen will be displayed showing the current and target temperature and the temperature bar.
- Page 11 Ideal Halo app onto the householders phone. (Available on Google Play or the Apple App Store.) 4. Open the Ideal Halo app, tap on create an account and follow the in-app instructions. 5. Once an account has been set up the app will automatically guide the user through connection of the Halo.
- Page 12 G. HALO FEATURES AND CONFIGURATION To enter the settings menu press the menu button. Menu options Action Holiday mode allows the device to be switched off for a pre-defined period of Holiday time then automatically returns to the pre-programmed heating schedule. Timed heating schedule Set a heating schedule with up to 6 periods per day.
-
Page 13: Advanced Settings
Automatically move to daylight saving. Frost protection The temperature that will be used to protect your home when the thermostat is off. Can be set 5°C. Service phone number Ideal Boilers Opportunity to input Installer contact number for service reminders. number... -
Page 14: Commissioning Checklist
COMMISSIONING CHECKLIST When the Halo is set up use this commissioning checklist to check and complete the install. Description Confirmed Zigbee LED on Smart Interface Use the “Identify” function to confirm successful pairing has flashes green taken place. Short press on the Pair button on the Smart Halo home screen flashes to Interface. -
Page 15: Troubleshooting
Description Confirmed Zigbee network icon is present on the Halo home screen. Cloud network icon is present on Halo home screen. Time and date correct. Installer contact details inputted if required. Suitable schedule has been entered for the user. General overview of operation provided to user - refer to use guide. Any advanced settings changes have been recorded. - Page 16 On disconnection, the Smart Interface will automatically begin the setup process as per section D6 of the installation guide. Hereby, Ideal Boilers Ltd declares that this device (model 222142) is in compliance with: Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address www.idealboilers.com...