Download
Share
Print this page
  1. Manuals
  2. Brands
  3. IDEAL Manuals
  4. Thermostat
  5. Touch Logic Combi
  6. Quick start manual

IDEAL Touch Logic Combi Quick Start Manual

Smart
Hide thumbs
1
2
3
4

Advertisement

Quick Links

Download this manual

QUICK START GUIDE

Logic Combi
For User & Installation Guide please visit www.idealboilers.com
IMPORTANT: This product MUST be installed by a Gas Safe Registered Engineer
INSTALLATION
1. Isolate electrical power to the
boiler.
2. Remove boiler front panel.
3. Remove the blanking plate.
4. Remove link wire plug & keep in
a safe place.
5. Connect the transceiver
electrical plug.
6. Locate and push the transceiver
assembly into the boiler.
7. Re-fit the boiler front panel
8. Insert only 3 batteries into the
Thermostat.
9. Turn electrical power back on
to the boiler and immediately
insert the fourth battery into the
Thermostat.
10. Hold the thermostat
approximately 2
metres away from
the boiler and
"CONNECTING TO
BOILER" will be
displayed on your
screen.
In the unlikely event that commissioning is unsuccessful (e.g. central heating
will not switch on or will not switch off), electrically isolate the boiler,
remove 1 battery and repeat from step 8.
Blanking
Plate
11. After approximately
60 seconds "Set
System Time" will be
displayed on your
screen. Use up and
down arrows to set
the time. Once time is
set press "DONE"
Transceiver
12. "Set System Date" will
be displayed on your
screen. Use up and
down arrows to set
the date. Once date is
set press "DONE".

Advertisement

loading

Related Manuals for IDEAL Touch Logic Combi

Summary of Contents for IDEAL Touch Logic Combi

  • Page 1: Quick Start Guide

    QUICK START GUIDE Logic Combi For User & Installation Guide please visit www.idealboilers.com IMPORTANT: This product MUST be installed by a Gas Safe Registered Engineer INSTALLATION 1. Isolate electrical power to the boiler. 2. Remove boiler front panel. 3. Remove the blanking plate. 4.

  • Page 2: Troubleshooting

    TROUBLESHOOTING Press the Thermostat screen. If screen does not illuminate then replace batteries. Battery Replacement: Un-clip the thermostat from its cradle by sliding the thermostat upwards. Using a flat bladed screwdriver pop off the rear cover Replace batteries Refit battery cover Batteries should operate for approximately 18 to 24 months.
  • Page 3 LOCATION GUIDELINES In between your boiler and the Touch Thermostat there must be: • Less than 20 metres • No more than 2 walls and 1 ceiling • No large metallic objects (e.g. American fridge/freezer) • No large mirrors or windows •...
  • Page 4 WARRANTY All Ideal Touch Controls offer customers the comfort of a 12 month Ideal Guarantee, subject to the following terms and conditions. During the period of the guarantee we will replace free of charge, where it suffers a mechanical or an electrical breakdown as a result of defective workmanship or materials, subject to the following conditions and exclusions;...