Commissioning Checklist - IDEAL Halo Combi Wi-Fi Installation Manual

COMMISSIONING CHECKLIST

When the Halo is set up use this commissioning checklist to check and complete the install.
Description
Use the "Identify" function to confirm successful pairing has
taken place. Short press on the Pair button on the Smart
Interface. Press Pair button again to exit "Identify" function.
Halo is positioned in the homeowners chosen location if desk mounted.
Check RSSI (Received Signal Strength Indication) of the
Zigbee wireless connection via support page on the PRT
(access via the menu).
Check RSSI (Received Signal Strength Indication) of the
Zigbee wireless connection and the Wi-Fi connection via the
support information in the Halo app.
On the Halo set the mode to AUTO then increase the
temperature to 30°C (repeat using Halo app).
On the Halo set the mode to AUTO then decrease the
temperature to 5°C (repeat using Halo app).
Check the Smart Interface indication is correct.
Full battery level indication on Halo home screen.
Zigbee LED on Smart Interface
flashes green
Halo home screen flashes to
indicate successful pairing
Target RSSI between 0 and -65
and text green
Target RSSI between 0 and -65
and text green
Flame ON
Boiler ON
Boiler LED on Smart Interface
ON (Green)
Flame OFF
Boiler OFF
Boiler LED on Smart Interface
OFF
Power LED green
Zigbee LED green
Connectivity LED green
Confirmed