Wallbox PULSAR PLUS Installation Manual page 3

EN
GETTING STARTED
Safety instructions
SAVE THESE INSTRUCTIONS | INSTRUCTIONS PERTAINING TO RISK OF FIRE OR ELECTRIC SHOCK
WARNING: When using electric products, basic precautions should always be
followed, including those below. This manual contains important instructions that
cover the safe installation, operation and maintenance of the unit.
• Read all instructions before installing and using your Wallbox charger.
• Permanent (hardwired) connection of your charger and/or installation of
electrical circuits, conduit, and NEMA receptacles must only be performed by a
qualified electrician in accordance with all local electrical codes and ordinances.
Unauthorized installation or modifications will void the manufacturer's warranty.
• This device should be supervised when using around children.
• Do not put fingers into the electric vehicle connector.
• Do not use your Wallbox charger if the flexible power cord or EV cable is frayed,
has broken insulation, or any other signs of damage.
• Do not use your Wallbox charger if the enclosure or the EV connector is broken,
cracked, open, or shows any other indication of damage.
• Do not operate your Wallbox charger in temperatures outside its operating range
of -22ºF to 104ºF (-30ºC to 40ºC).
• Do not open your charger in rain or other inclement weather.
• Do not open the front cover of your charger while it is connected to the power
supply.
• Install your charger in a sufficiently ventilated location and avoid installation
in areas with direct sunlight.
• Do not install your Wallbox charger near flammable, explosive, or combustible
materials.
• All documents can also be found online at support.wallbox.com/na
• In case of flooding, do not operate your charger while it or your vehicle is
submerged in water.
• If your charger was submerged in water due to flooding, have a qualified
electrician inspect your charger prior to energizing or using your charger again.
Warning for Wallbox AC plug-in products: Grounding instructions
Your Wallbox charger must be grounded. If it should malfunction or break down, grounding
provides a path of least resistance for electric current to reduce the risk of electric shock.
Your charger is equipped with a cord having an equipment grounding conductor and a
grounding plug. The plug must be plugged into an appropriate receptacle that is properly
installed and grounded in accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-grounding conductor may
result in a risk of electric shock. Check with a qualified electrician or service
person if you are in doubt as to whether the product is properly grounded. Do not
modify the plug provided with the product. If it does not fit the receptacle, have a
proper receptacle installed by a qualified electrician.
4
Warning for Wallbox hardwired products: Grounding instructions
This product must be connected to a grounded, metal, permanent wiring system,
or an equipment-grounding conductor must be run with the circuit conductors and
connected to the equipment grounding terminal on the product.
See installation instructions.
WARNING: Consult a qualified electrician to ensure that the installation meets local regulations.
Legal notice
Any information in this manual may be changed without prior notice and does not
represent any obligation on the part of the manufacturer.
Any resulting damage due to disregard or actions contrary to the instructions in this
manual is excluded from the product warranty.
Images in this manual are for illustration purposes only and might differ from the
delivered product.
Maintenance instructions
• Your Wallbox charger contains no user serviceable parts. Do not attempt
to repair or service any other part of the unit yourself. If the unit requires
servicing, please contact Wallbox customer service.
• The installation, maintenance, and servicing of your Wallbox charger must
only be performed by qualified personnel in accordance with applicable local
regulations.
• Protect your Wallbox charger from any external impact.
• Take appropriate precautions with electronic medical implants.
• Disconnect the main service power to your charger before cleaning the unit.
Do not use cleaning solvents to clean any part of your charger. Use a clean,
dry cloth to remove accumulated dust and dirt.
• Under no circumstance should you over-tighten the connecting cable while it
is connected to the vehicle.
• Ensure that the charging cable is positioned in such a way so that it will not be
stepped on, tripped over, or subjected to damage or stress. Do not close your
garage door on the charging cord.
Moving and storage instructions
• Your Wallbox charger should never be lifted or carried by the power supply
cord or by the EV cable. Always lift or carry your charger by lifting up the
charger's enclosure.
• The charger is only to be used for fixed installations and cannot be used as a
portable device.
• Store your Wallbox charger in a dry location, and within the storage
temperature of -40ºF to 158ºF (-40ºC to 70ºC).
EN
5