NOTICE
Risk of damage to engine compartment compo-
nents!
Close the container after refilling the windscreen
▶
washer fluid.
The windscreen washer tank is located in the engine
compartment
» page
11.
The container can hold a volume of 3 litres and 4.7 li-
tres for vehicles with a headlight cleaning system.
›
Open the engine compartment lid
›
Gently open the top of the lid.
›
Top up the windscreen washer fluid.
Troubleshooting
Windscreen washer fluid level too low
illuminates together with
or
illuminates together with
›
Top up the windscreen washer fluid.
Frozen windscreen wipers
›
Carefully remove frozen windscreen wipers from
the windscreen before switching on the ignition
and free them from snow and ice.
Folding down windscreen wiper arms and
replacing windscreen wiper blades
NOTICE
Risk of damage to the windscreen wipers and the
engine compartment flap!
Close the engine compartment flap before the
▶
windscreen wiper arms are folded away from the
windscreen.
Do not turn on the ignition when the windscreen
▶
wiper arms are folded away.
Manually fold the windscreen wiper arms away
from the windscreen
›
Switch the ignition on and off again.
Lighting, windscreen wipers and washers ›
» page
128.
Windscreen wipers and washers
Fold the windscreen wiper arms away from the
windscreen via the Infotainment
›
In Infotainment, select the following menu.
Outside Mirror and wipers
›
Select the menu item for the service position of
the windscreen wiper arms.
Or:
Outside
›
By moving your finger sideways, choose the screen
with the menu item Mirror and wiper.
›
Select the Mirror and wiper menu item and then select
the service position of the windscreen wiper arms.
Replace the windscreen wiper blade
CAUTION
Risk of an accident!
Change the windscreen wiper blades once or twice
▶
a year.
›
Fold the windscreen wiper arm away from the
windscreen.
53
›
Within 10 seconds,
press the control lever
down and hold for
about 2 seconds.
The windscreen wiper
arms are in the folded
position.
›
Fold the windscreen
wiper arms away from
the windscreen.
›
Press the catch and re-
move the wiper blade.
›
Insert the new wiper
blade until it clicks into
place.
›
Fold the windscreen
wiper arm back onto
the windscreen.
›
Turn on the ignition
and push the control
lever down.