Table of Contents
Advertisement
Infotainment Swing
Infotainment overview
Touchscreen
A
Rotary control on the left
Press: Switch Infotainment on/off
▶
Turn: Adjust Volume
▶
Rotary control on the right
Press: Confirm menu item
▶
Turn: select menu item/set value
▶
Radio and Media menus
Phone menu
All menus
SmartLink menu
Tap: Display menu
▶
Hold: switch voice control for the SmartLink
▶
application on/off
Information about vehicle settings
Infotainment settings
System
Restriction
For safety reasons, operation of some Infotainment
functions while driving is not possible or is restricted.
The Infotainment system indicates this by means of
a message in the screen.
Basic settings
Setting basic functions
To display the available Infotainment system set-
tings, proceed as follows.
›
Tap on
.
Or:
›
Tap on
.
The following basic functions can be set.
Infotainment Swing ›
Infotainment overview
Time and date.
▶
Language.
▶
Units.
▶
Restore factory settings.
▶
Sound settings
The Infotainment sound is set in the menu
The following menu items can be set.
Setting the equalizer.
▶
Adjusting the volume ratio.
▶
Volume adjustment of individual Infotainment
▶
functions.
Some are adjustable, for example the following
menu items.
▶
Setting the maximum volume when Infotainment
is turned on.
▶
Speed-dependent volume setting.
▶
Setting the Infotainment to mute with the park-
ing aid switched on.
Depending on the equipment, the following ad-
vanced sound settings can be set.
Setting space optimisation.
▶
Setting the audio profiles according to genre.
▶
Adjusting the subwoofer volume.
▶
Configuration wizard
The configuration wizard helps to set certain Info-
tainment functions.
The configuration wizard is automatically displayed if
there are at least two non-selected menu items after
turning on the Infotainment.
›
To switch off the automatic display, tap on Don't
show again when the configuration wizard is displayed.
›
For manual display, tap on
ard.
Setting the MENU
The position of the functional surfaces in the MENU
menu can be customized as follows.
›
Press and hold the desired functional surface until
it is free.
›
Move the functional surface to a different position.
Troubleshooting
Infotainment not responding
The Infotainment system must be restarted.
›
Press
for more than 10 s.
›
Wait for the restart to complete.
61
.
Configuration wiz-
Advertisement
Table of Contents
