Table of Contents
Advertisement
Manual gearbox
Operation
NOTICE
Danger of engine damage!
Shift to a higher gear before reaching the red area
▶
on the tachometer scale.
NOTICE
Danger of gearbox damage!
Fully depress the clutch pedal when changing gear.
▶
When not shifting gear, do not put your hand on
▶
the shift lever.
Engaging reverse gear
›
Stop the vehicle.
›
Fully depress the clutch.
›
Move the shift lever to the neutral position.
›
Push the shift lever down.
›
Turn it completely to the left.
›
Wait briefly.
›
Engage reverse gear.
Automatic gearbox
Automatic gearbox modes
Select automatic gearbox mode
›
To change the automatic gearbox mode, move the
selector lever forwards or backwards.
The selector lever then returns to the starting po-
sition.
›
Press the key
to enter and choose the mode .
P
The selected mode is displayed in the instrument
cluster.
Neutral
There is no transmission of engine power to the
wheels.
Forward drive / sports program
In mode, the gear is changed at higher speeds
than in mode.
The choice between and is made by moving
the selector lever to the rear.
ready started. Only mode can be selected with the
engine stopped and the ignition switched on. This
can, for example, be useful when towing the vehicle
or when driving through a car wash.
Unlock automatic gearbox from mode
›
Risk of the stationary vehicle rolling away automati-
cally!
▶
Operation
Starting up
›
›
›
›
Speeding up while driving (kick-down)
›
Stopping temporarily (e.g. at a junction)
›
Stopping
›
›
›
›
Parked vehicle
The drive wheels are
then mode is automatically selected.
locked.
Driving in neutral
Select the mode
If the system detects that no gear is engaged while
only when the vehi-
driving, it automatically switches to neutral position.
cle is stationary.
Reverse gear
The mode can be
Requirements for driving in neutral position
selected at a speed
✓
below 10 km/h.
✓ Neither the accelerator nor the brake pedal is
✓ The vehicle speed is 20-130 km/h.
✓ There is no device connected to the trailer sock-
Acceleration on start-up (launch control)
This function allows maximum acceleration during
start-up.
›
›
Starting and driving ›
To choose mode , or , the engine must be al-
is lit up - the automatic gearbox is in mode
Press the brake pedal and select the desired mode.
WARNING
When the mode , , or is selected, secure the
vehicle with the brake.
Keep the brake pedal depressed.
Start the engine.
Use the selector lever to select the desired mode.
Release the brake pedal and press the accelerator
pedal lightly.
Fully depress the accelerator.
Leave the selected mode
cle with the brake pedal.
Keep the brake pedal depressed.
Secure the vehicle with the parking brake.
Choose the mode.
Turn off the engine.
When turning off the engine in mode , or
will be displayed in the instrument cluster.
mode is chosen.
pressed.
et.
Select mode or manual shift mode.
Disable the TCS
» page
118.
Manual gearbox
111
and secure the vehi-
Advertisement
Table of Contents
