Models - Graco 217314 Instructions-Parts List Manual

Spring Operated Fluid Regulators
Part No. Series Maximum Fluid Inlet
Pressure, psi (kPa, bar)
214895 H 250 (1800, 18)
214706L H 250 (1800, 18)
24A082 {
A 250 (1800, 18)
243414 {
C 250 (1800, 18)
255374 {
B 250 (1800, 18)
217314L F 250 (1800, 18)
221118L E 250 (1800, 18)
{ ISO pitch thread inlet and outlet. Not compatible with US standard pitch.
Fluid housing coated with PTFE polymer.
L These models are
The fluid supply system's main line pressures often exceed the pressure range of the gauge supplied
with regulators 214706, 243414, 255374, and 24A082. Exposing this gauge to excessive pressure can
damage the gauge, causing inaccurate readings and the needle will not return to zero.
This damage is not covered by the Graco warranty.
Air Operated Fluid Regulators
Part No. Series Maximum
Regulated
Air Pressure,
psi (kPa, bar)
214980 }
F 30 (210, 2.1)
244375 }
B 30 (210, 2.1)
} Regulated air pressures above 30 psi (210 kPa, 2.1 bar) may be used if a higher rated gauge is installed.

Models

Regulated Pressure
Range, psi (kPa, bar)
5–100 (34–700, 0.3–7)
5–100 (34–700, 0.3–7)
5–100 (34–700, 0.3–7)
5–100 (34–700, 0.3–7)
5–100 (34–700, 0.3–7)
20–160 (140–1100, 1.4–11)
20–160 (140–1100, 1.4–11)
and certified.
Maximum Fluid
Inlet Pressure,
psi (kPa, bar)
250 (1800, 18)
250 (1800, 18)
Gauge
No
Yes (see
below)
Yes (see
below)
Yes (see
below)
Yes (see
below)
Yes
No
Regulated Pressure
Range,
psi (kPa, bar)
0–30 (0–210, 0–2.1)
5–100 (34–700, 0.3–7)
Gauge Pressure
Range,
psi (kPa, bar)
n/a
0–100 (0–700, 0–7)
0–100 (0–700, 0–7)
0–200 (0–1400, 0–14)
0–200 (0–1400, 0–14)
0–300 (0–2100, 0–21)
n/a
Gauge Gauge Pressure
Range,
psi (kPa, bar)
Yes 0–30 (0–210, 0–2.1)
No n/a
307212 3