Models - Graco 214895 Instructions-Parts List Manual

Spring Operated Fluid Regulators
Part No. Series Maximum Fluid Inlet
Pressure, psi (kPa, bar)
214895 H 250 (1800, 18)
214706L H 250 (1800, 18)
24A082 {n A 24A082 {n A 24A082 {n A 250 (1800, 18) 250 (1800, 18) 250 (1800, 18)
26C160 { A 250 (1800, 18)
217314L F 250 (1800, 18)
221118L E 250 (1800, 18)
{ ISO pitch thread inlet and outlet. Not compatible with US standard pitch.
n Fluid housing coated with PTFE polymer.
L These models are
The fluid supply system's main line pressures often exceed the pressure range of the gauge supplied
with regulators 214706, 26C160, and 24A082. Exposing this gauge to excessive pressure can damage
the gauge, causing inaccurate readings and the needle will not return to zero.
This damage is not covered by the Graco warranty.
Air Operated Fluid Regulators
Part No. Series Maximum
Regulated
Air Pressure,
psi (kPa, bar)
214980 } F 30 (210, 2.1)
244375 B 100 (700, 7)
} Regulated air pressures from 30- -100 psi (210- -690 kPa, 2.1- -6.9 bar) may be used if a 100 psi rated gauge is
installed.

Models

and certified.
Maximum Fluid
Inlet Pressure,
psi (kPa, bar)
250 (1800, 18)
250 (1800, 18)
Regulated Pressure
Range, psi (kPa, bar)
5--100 (34--700, 0.3--7)
5--100 (34--700, 0.3--7)
5--100 (34--700, 0.3--7) 5--100 (34--700, 0.3--7) 5--100 (34--700, 0.3--7)
5--100 (34--700, 0.3--7)
20--160 (140--1100, 1.4--11) Yes
20--160 (140--1100, 1.4--11) No
Regulated Pressure
Range,
psi (kPa, bar)
0--30 (0--210, 0--2.1)
5--100 (34--700, 0.3--7)
Gauge Gauge Pressure
Range,
psi (kPa, bar)
No n/a
Yes (see 0--100 (0--700, 0--7)
below)
Yes (see Yes (see Yes (see 0--100 (0--700, 0--7) 0--100 (0--700, 0--7) 0--100 (0--700, 0--7)
below) below) below)
Yes (see 0--200 (0--1400, 0--14)
below)
0--300 (0--2100, 0--21)
n/a
Gauge Gauge Pressure
Range,
psi (kPa, bar)
Yes 0--30 (0--210, 0--2.1)
No n/a
307212 3