Keysight Technologies N9010A EXA Functional Tests page 17

Displayed Average Noise Level (DANL)
Procedure
11.The value of the normalized displayed average noise should be less than
12.Change the analyzer center frequency to the next value listed in
13.Repeat
Table 2-1 Displayed Average Noise Level (DANL) Results
Center Frequency
10 MHz
2 GHz
6 GHz
13 GHz
20 GHz
26.5 GHz
Chapter 2
the specification value.
Press: FREQ Channel, Center Freq, [Table 2-1 Value], GHz
step 7 through
analyzer frequency range.
Measured Average Noise Level (dBm)
step 12 to fill in the remainder of
Normalized Average Noise Level/(1 Hz
BW) (dBm)
Table 2-1.
Table 2-1 for your
Test Limits
(dBm)
–145
–145
–143
–142
–136
–133
17