Technical Support • (800) 526-0288 • Mon-Fri, 8 Am - 5 Pm Est - Watts Aerco Benchmark BMK750 Operation And Service Manual

Benchmark with Edge [I]: Operation-Maintenance Manual
Change Log:
Date Description
Rev B:
Added Appendix A: Wiring Schematics
Replaced gas train graphics in Section 3.2, 5.2 and 5.3.
Corrected location of Outdoor Air and Air Temp Sensor terminal
in Section 6.1.1.
5/25/2020
Clarified reason for "Dual Fuel" column in Table 4.1
Modified BST configuration instructions, Sections 7.3.1 – 7.3.8
Additions to cover Low Gas Pressure (LGP) models, in
Sections 3.4.8, 3.4.9, 4.3 and 5.2.2.
Ref C:
Revised intro to Combustion Calibration regarding Low NOx,
Section 4.5.
DIR 20-05: Replace BMK 5000/6000 Pilot Burner (29700) with
P/N 66026, Sections 4.4 and 8.2.1 ang 8.3. Revised front and
rear refractory instructions, Section 8.9. (ref PIR 1608-3).
DIR 20-23: Revised Combustion Calibration values for BMK
4000 & 5000N for both Natural gas (Section 4.5.1) and Propane
8/20/2020
(Section 4.5.2).
Added BMK 4000 & 5000N tables to Section 3.4: Start/Stop
Levels.
Added removal of air filter bag to startup procedure, Section 4.1
(ref ECN 1687).
Updated BMK 4000/5000N Schematic drawings, Appendix A-3.
Revised Figure 8-1d, Ignitor-Injector orientation, Section 8.2.
Rev D:
11/2/2020
Updated Wiring Schematics in Appendix A for increased clarity
OMM-0145_D • GF-218 •
11/2/2020
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Changed By
Linley
Thobourne &
Chris Blair
Chris Blair
Linley
Thobourne
Page 213 of 213