Festo DAPZ AR Series Operating Instructions Manual page 29

DAPZ−...−AR
Connecting the cables
1
Fig. 14
1
Recess for correct position
ing of the mounting plate in
the housing
1. Loosen the fastening screw for the mounting plate 3.
2. Lift the mounting plate vertically upwards out of the housing.
3. Loosen the union nut of the cable through hole 2.
4. Insert the control cable in the
housing.
Festo DAPZ−...−AR 0711b English
2
3
2
Union nut for the cable clamping
3
Fastening screw for the mounting plate
Fig. 16
Fig. 15
29