Display Menu; Units Menu; Language Menu; Button Beep - Generac Power Systems MAGNUM Owner's Manual

Figure 3-12. Configuration Menu
Figure 3-13. Configuration Menus
NOTE: Most configuration
immediately. Some, such as Idle RPM, take effect on the
next power up.

Display Menu

The Display menu allows the user to configure items
affecting how information is displayed.
Figure 3-14. Display Menu
Owner's Manual for Dry-Prime Diesel Trash Pumps
changes take effect

Units Menu

This menu allows the user to set the units used for speed,
distance, pressure, volume, and temperature inde-
pendently. Button 4 cycles through the available values
for the selected item.
Figure 3-15. Units Menu
Speed MPH (miles per hour); km/h (kilome-
ters per hour); Knts (knots)
Distance Miles; km (kilometers); NM (nautical
miles)
Pressure PSI (pounds per square inch); bar
(barometric units); kPa (kilopascals)
Volume Gal (US gallons); IGal (Imperial gal-
lons); Liters
Temperature °F (Fahrenheit); °C (Celsius)

Language Menu

This menu allows the user to choose between English,
Swedish, French, German, Spanish, Italian, Dutch and
Portuguese. The currently selected value is indicated by the
check mark . Button 4
Figure 3-16. Language Menu

Button Beep

The soft buttons emit an audible beep when this item is
On. Button beep is disabled by setting this item to Off.
The audible beep still sounds when an alarm occurs.
Button 4 cycles between On and Off.

Gauges Menu

This menu allows the user to configure aspects of the
gauges displayed. Button 3
value while button 4
highlighted item.
Operation
selects the highlighted value.
selects the previous
selects the next value of the
23