Cocraft LXC DD18 Original Instructions Manual page 10

Table of Contents

Advertisement

Available languages
  • EN

Available languages

Overload protection and other safety features
The battery has a number of safety features to prevent damage to the drill/driver and
battery during use.
During short high-load situations the overload protection may turn the drill/driver
off. This protection resets automatically. Release the trigger, wait a few seconds,
ensure that the drill/driver is under no load and then restart it. The drill/driver
should now function normally again.
If subjected to a high-load for an extended period the overheating protection
may turn the drill/driver off. This feature is self-resetting but the drill/driver cannot
be restarted until it has returned to normal operating temperature. Let the drill/
driver and battery cool properly before trying to start working again. Exposure to
continuous sunlight can give rise to detrimental temperatures and should therefore
be avoided.
The battery has a deep discharge undervoltage protection device which operates
when the battery becomes discharged. The undervoltage protection device turns
the drill/driver off automatically and the battery then needs to be recharged.
Instructions for use
Slide the battery into the battery connection,
making sure that it clicks securely into place.
Functions
Power trigger
Select forward or reverse using the rotation selector (5). The rotation selector also
has a middle setting which locks the power trigger. If the selector is set to this middle
position, the drill will not start. The drill/driver is started and stopped by squeezing or
releasing the power trigger (4).
The drill/driver is equipped with a variable speed control, which makes it extremely
practical for driving screws. The more the power trigger is squeezed, the higher
the speed of the chuck.
Light
The drill/driver is equipped with a light (3) which is positioned close to the battery so that
it can light up the work area without being obscured by the chuck. The light comes on
when the power trigger is squeezed and goes off when the power trigger is released.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Djc159sz-18018-363041-1377

Table of Contents