Table of Contents
Advertisement
FabiaTech Corporation
SATA Configuration
You can use this screen to select options for the SATA Configuration Settings. Use
the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys
to change the value of the selected option. A description of the selected item
appears on the right side of the screen. The settings are described on the following
pages. An example of the SATA Configuration screen is shown below.
SATA Controller
This item allows users to enable or disable SATA Controller.
Available Options: Disabled, and Enabled
Default setting: Enabled
HDC Configure as
This field is Hard Disk controller can select IDE or AHCI mode.
Available Options: IDE, and AHCI
Default setting: AHCI
31
Advertisement
Table of Contents
