Engine; Running In Period; Running In Period - At First 50 Hours - Hayter MT313 Operator's Manual

MAINTENANCE
1.43 1.43

ENGINE

Refer to the Engine Operator's Manual for maintenance information.

RUNNING IN PERIOD

Check wheel nut torque settings:
During first 50 hours of use and in addition to routine checks. Refer -
DAILY AND BEFORE USE. Check wheel nut torques twice a day.
Front axle wheel nut torque setting - 54 Nm.
Rear axle wheel nut torque setting - 54 Nm.

RUNNING IN PERIOD - AT FIRST 50 HOURS

Change the transmission oil filter: Unscrew and remove the bottom of the
transmission oil filter housing. Withdraw the filter element and discard. Refit
a new filter element (Hayter part no. 995861) and replace the housing.
1
1.Transmission Oil Filter
995920KG200105