Page 1
THIS UNPUBLISHED DOCUMENT CONTAINS HAYTER CONFIDENTIAL AND PROPRIETARY INFORMATION. IT MAY NOT BE WHOLLY OR PARTIALLY COPIED, DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE WITHOUT WRITTEN PERMISSION FROM HAYTER. IF PUBLICATION OCCURS, THE FOLLOWING NOTICE APPLIES: “HAYTER ALL RIGHTS RESERVED”.
Page 2
Motif 41 Push Code 437H OWNER’S HANDBOOK Original Version (EN) From Serial Number: 316000001 Onwards Issued: 03/09/15 Part number: 111-7898 Rev B...
CONTENTS Stopping Introduction Slopes Safety Compliance Height of Cut Main Features Non Grassed Areas Grassbag Specifi cations Collection Without Grassbag Safety Symbols Heavy Growth Safety Precautions 6 - 7 Maintenance Schedule Safety Alert Symbol Mower Maintenance 12 - 15 Training Engine Detail Preparation Carburettor Adjustments...
2 dB (A) Hayter Limited reserves the right to amend product specifi cations without prior notifi cation. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk...
MAIN FEATURES SPECIFICATIONS Code Weight 28.1 Kg Length 1395 mm Width 490 mm Height 1010 mm Width of Cut 41 cm Height of Cut (8 positions) 25 - 55 mm Cutterblade Speed 2800 rpm Engine Briggs & Stratton Engine Type Series 600EX Engine Power rating (Net) 2.22 kW...
Please ensure all Safety Decals are secured on the mower before using the product. If any of the decals are missing or not secure do not use the mower. Hayter authorised dealer for replacement Safety Decals. Contact your local WARNING: Improper maintenance, use of non-conforming spare parts, or the removal or modifi cation of the Safety Decals may cause death or serious injury.
A damaged cutterblade or loose fi xing bolt are major hazards. Never mow while people, especially children, or pets are nearby. Always replace worn or faulty parts with genuine Hayter parts. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition.
Replace worn or damaged parts for safety. Never touch the exhaust/exhaust guard or cooling fi ns when the For Spare Part Numbers, please refer to the Hayter Parts List. engine is hot. Wear strong work gloves when removing and reassembling the cutterblade.
Handbook. Grassbag Assembly following items have been supplied correctly. If any items are missing, contact your local Hayter dealer. Before fi rst use assemble the grassbag and frame. Slide the Check Oil Level frame into the grassbag (1), ensuring that the handle is above the grassbag as shown.
OPERATING THE MOWER Fuel Type If the cable is not moving freely or the engine does not stop, take If the engine does not start after 5 attempts - Refer to Trouble your mower to your nearest dealer for a service. Shooting.
OPERATING THE MOWER locking notch, then pull backwards to lower the height of cut overloading. Turning or push forwards to raise the height of cut. Finally release the (Refer fi g. 15) lever at the required position and ensure it locks fi rmly into one Apply downward pressure on the handlebar to raise the front of the setting notches.
• Replace the air cleaner. Daily • Check the idler speed and adjust if necessary. This should be serviced by a Hayter authorised service dealer. Your • Check the oil level. service dealer will have the appropriate tools. • Remove grass debris from around the engine, exhaust/ •...
MOWER MAINTENANCE Engine Detail damage. • Close the cover (1). (Refer fi g. 20) • Remove the oil fi ller dipstick and drain the oil into a suitable Improper maintenance, use of nonconforming replacement container. components, or the removal or modifi cation of the engine Operating the engine without an air fi...
Fertilisers and top dressings are particularly corrosive. prevent overheating and engine damage. We recommended Thoroughly clean the mower deck immediately after use on that this service be carried out by an authorised Hayter Service treated grass and store well away from corrosive materials. dealer.
25 mowing hours or more frequently if injury should the tool slip. ALWAYS use genuine Hayter conditions require. Remove the cutterblade from the mower and replacement parts.
MOWER MAINTENANCE Storage exceed the stated volume of oil as engine damage may occur on re-starting. Do not replace the spark plug lead. Slowly Ensure that the cables do not become trapped at the pivot points pull the engine start-grip once to crank the engine. This will when collapsing the mower for storage.
LAWN CARE CALENDAR To be used as a guide only January August There is very little work to do this month apart from brushing away leaves. Keep off the grass if Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a frozen or waterlogged.
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Engine will not turn Engine vibrates Mounting bolt loose Tighten bolt Engine stop lever released Operate engine stop lever over excessively Cutterblade bolt loose Tighten bolt Incorrect oil level Check oil level Cutterblade out of balance Balance cutterblade Obstruction under deck...
Hayter Authorised Service Dealer for clarifi cation. This warranty does not apply to any unit that has been tampered with, altered, misused, abused or used for hire, and will become invalid if non genuine Hayter parts are fi tted. This warranty does not cover for minor mechanical adjustments unless they are due to defective material or workmanship.
Hayter dealer. Your personal information will be processed by Hayter in the UK. It will also be entered into the Toro warranty system, which is hosted on servers located within the United States where privacy law may not provide the same protection as applies in your country.
1st Year (12 Months) 2nd Year (24 Months) We certify that this service has We certify that this service has been carried out by an been carried out by an Authorised Hayter Service Authorised Hayter Service Dealer Dealer Date:____________________ Date:____________________...