Introduction - Hayter MT313 Operator's Manual

1.17

INTRODUCTION

The Hayter MT313 Triple Turf Mower is a diesel engine powered self propelled machine with hydraulic sys-
tems for ground drive, cutterhead drives and steering. The machine operates in three wheel drive.
The Hayter MT313 Triple Turf Mower is a precision built machine designed solely for cutting grass and sim-
ilar low lying ground vegetation within the limitations stated in this manual. Use in any other way is consid-
ered as contrary to the intended use. Compliance with and strict adherence to the conditions of operation, ser-
vice and repair as specified in this Operators Manual also constitute essential elements of the intended use.
The way in which this machine is operated and maintained will have a profound effect on its performance and
reliability.
This manual contains advice on the Hayter MT313 Triple Turf Mower which should be operated, serviced and
repaired only by persons who are familiar with its particular characteristics and who are acquainted with the
relevant safety procedures.
The safety precautions listed herein and all other generally recognised regulations on safety and all road traf-
fic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of liability for any result-
ing damage or injury.
In the pursuit of continuous product development Hayter Limited reserve the right to alter specifications with-
out notice.
Cutterhead Variants: The Hayter MT313 can be fitted with a range of cutterhead configurations and
optional extras:
Cutterhead Cylinder diameter
726B
726B
726B
726B
Optional Extras:
- Beacon Kit - Amber flashing warning light.
- R.O.P.S Kit (Roll Over Protective Structure) 2 post design.
- Parking brake release kit
- Working light kit
- Independent cutting unit lift kit
- Grass box kit
- Narrow track kit
- Grooved front roller kit
- Smooth front roller kit
- Crash frame kit
A R.O.P.S. is available for increased operator safety when working on slopes, refer - SAFETY PRE-
CAUTIONS.
When fitting optional extra kits to the mower be sure to fix the serial number decal supplied with the kit to
the rear bulkhead underneath the engine cover. This will help the Hayter spare parts department to supply
the correct spare parts throughout the service life of the mower.
Left and Right: Throughout this manual the terms 'Left' and 'Right' refer to the machine when looking in the
direction of forward travel.
INTRODUCTION
Number of blades
178mm 5
178mm 5
178mm 7
178mm 7
Fixed Floating Heads with
Heads grooved front rollers
1.17
995920KG200105