Installer Setting - Group Setting - LG ABNQ18GM1T0 Installation Manual

Installer Setting - Group Setting

It is a function for settings in group control, or 2-remote controller control.)
Remote controller
Master
Slave
* Refer to the 'group control' part for details
NOTE
!
Some functions may not be available during a group control except basic operation settings,
fan speed low/med/high, remote control lock setting, time setting.
Press and hold
1
than 3 seconds to enter the installer
settings mode.
- If pressing only once briefly, it will
enter the user settings mode.
Make sure to press and hold for more
than 3 seconds.
Move to the Master/slave selection in the
2
menu using
as below.
Select the remote control master/slave
3
using
Code value for remote
control master/slave
4
Press
5
Press
If no button is selected for about
25 seconds after setup, it exits the setup
mode automatically.
If the
exit, the changes will not apply.
Indoor unit operates based on master remote controller at group
control. (Master is set when delivering from the warehouse.)
Setup all remote controllers except one master remote controller
to slave at group control
OPTIONAL OPERATION
button for more
button and then it displays
button.
Set value
❈
Set value for remote control
00 : Slave
01 : Master
button to save the setting.
button to exit.
button is not selected before you
Function
31