Installation Instruction - LG ABNQ18GM1T0 Installation Manual

INSTALLATION INSTRUCTION

1
Please fix tightly using provided screw
after placing remote controller setup board
on the place where you like to setup.
- Please set it up not to bend because poor
setup could take place if setup board
bends.
Please set up remote controller board fit
to the reclamation box if there is a
reclamation box.
INSTALLATION INSTRUCTION
2
Can set up wired remote controller cable
into three directions.
- Set up direction: the surface of wall
reclamation, upper, right
- If setting up remote controller cable into
upper and right side, please set up after
removing remote controller cable guide
groove.
* Remove guide groove with long nose.
① Reclamation to the surface of the wall
② Upper part guide groove
③ Right part guide groove
2
3
1
<Wire guide grooves>
15
2
3