Table of Contents
Advertisement
INSTALLATION INSTRUCTION
1
Please install the wired controller
mounting plate to the position you want
with the screws provided.
- Do not bend the mounting plate during
installation, as it may cause poor fixing.
Please install a wired controller with a
mounting box (if any) properly. (The
installation box shall be type 86)
INSTALLATION INSTRUCTION
2
The connection cables of the wired
controller can be set from two directions:
- Installation direction: slotted on the wall
surface, underside.
- If install a wired control cable from the
guide slot below, please remove the slot
after installation.
* Remove the guide slot with long-nose
pliers.
① Slotted on the wall surface
② Underside guide slot
<Cable slot>
15
Advertisement
Table of Contents
