Table of Contents
Advertisement
Installation instruction
1. Please fix tightly using provided screw after placing remote controller setup board
on the place where you like to setup.
- Please set it up not to bend because poor setup could take place if setup board bends.
Please set up remote controller board fit to the reclamation box if there is a reclamation box.
2. Can set up Wired remote controller cable into three directions.
- Setup direction: the surface of wall reclamation, upper, right
- If setting up remote controller cable into upper and right side, please set up after removing remote controller
cable guide groove.
h Remove guide groove with pliers.
① Reclamation to the surface of the wall
② Upper part guide groove
③ Right part guide groove
2
3
1
<Wire guide grooves>
How to connect Remote Controller(Accessory)
2
3
Installation Manual 15
Advertisement
Table of Contents
