Desoutter EAB 15-900 Product Instructions

Cordless angle nutrunner

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Model

EAB 15-900

EAB 26-560

EAB 32-410

EAB 45-330

EAB 50-450

EAB 60-370

EAB 75-300

EAB 95-240

Download the latest version of this document at

http://www.desouttertools.com/info/6159929380_EN

Read all safety warnings and instructions

Failure to follow the safety warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

Cordless Angle Nutrunner

Product Instructions

Part number

6151657310

6151657320

6151657330

6151657340

6151657350

6151657360

6151657370

6151657380

WARNING

Printed Matter No. 6159929380_EN

Issue No.

Date

06/2020

Page

1 / 24

Table of Contents

Need help?

Do you have a question about the EAB 15-900 and is the answer not in the manual?

Questions and answers

Summary of Contents for Desoutter EAB 15-900

Page 1 Printed Matter No. 6159929380_EN Issue No. Date 06/2020 Page 1 / 24 Cordless Angle Nutrunner Product Instructions Model Part number EAB 15-900 6151657310 EAB 26-560 6151657320 EAB 32-410 6151657330 EAB 45-330 6151657340 EAB 50-450 6151657350 EAB 60-370 6151657360 EAB 75-300...
Page 2: Table Of Contents
Table of Contents Product Information .......................... 3 General Information......................... 3 Warranty.......................... 3 Website .......................... 3 Information about spare parts .................... 3 Dimensions (mm) ......................... 3 CAD files .......................... 4 Overview ............................ 4 General overview ......................... 4 Product description ...................... 4 Technical data........................ 5 Accessories.......................... 6 Installation.............................. 7 Installation Instructions........................ 7 Inserting the battery pack..................... 7 How to connect the tool to CVIMONITOR................ 7 How to install optional accessories .................. 7 Operation.............................. 8...
Page 3: Product Information
• The product warranty relies on the correct use, maintenance, and repair of the tool and its component parts. • Damage to parts that occurs as a result of inadequate maintenance or performed by parties other than Desoutter or their Certified Service Partners during the warranty period is not covered by the warranty.
Page 4: Cad Files
Overview General overview EAB tools are cordless angle-head nutrunners. They are hand-held by the operator and powered by a Desoutter battery pack. On delivery, the tool display is protected by a password. Tools are delivered with 1 Pset. The target torque is configurable from the tool display.
Page 5: Technical Data
Product Information Trigger Battery footprint Display Programming buttons Reverse button Technical data Voltage (V) 36 V Output drive Model Type EABx 15-900 Sq. 1/4" EABx 26-560 Sq. 3/8" EABx 32-410 Sq. 3/8" EABx 45-330 Sq. 3/8" EABx 50-450 Sq. 3/8" EABx 60-370 Sq.
Page 6: Accessories
Product Information Rated speed (rpm) Model EABx15-900 EABx 26-560 EABx 32-410 EABx 45-330 EABx 50-450 EABx 60-370 EABx 75-300 EABx 95-240 EABx stands for EAB/EABA/EABC. Weight Model (kg) (lb) EABx 15-900 1.55 3.42 EABx 26-560 1.65 3.64 EABx 32-410 1.65 3.64 EABx 45-330 1.76...
Page 7: Installation
Installation Installation Installation Instructions Inserting the battery pack Insert the battery pack in front or behind the tool until a locking sound can be clearly heard. There is no ON/OFF switch: the tool is ready to operate as soon as a battery pack is mounted. When the tool is powered on, tool LEDs are blinking.
Page 8: Operation
Operation Operation Configuration Instructions How to configure the tool Icons and buttons The password is enabled. The password is disabled. Press the button "Validate/Run reverse". Press the right button. Press the left button. "Validate/Run reverse" button Right button Left button Validate Save Quit...
Page 9 Operation Maintenance password, Calibration are settings protected by the Maintenance password. A red padlock is displayed on the top line of the main screen. Press this button during 2 seconds. Press this button to reach Configuration. Go to Enter password, then Pset password, use the buttons to display "1", save and validate. The red padlock turns green.
Page 10 Operation • kg.m • kg.cm • oz.in • dNm To change the torque unit, go to the main screen. Press this button during 2 seconds. Press this button to reach Configuration. Go to Torque unit, use the buttons to select the torque unit and validate. How to set up the reverse mode Go to the main screen.
Page 11: Operating Instructions
Operation Starting at the "Start" signal, the tool runs with a programmed acceleration up to "Rundown speed". The tool keeps running at "Rundown speed". Once "Downshift torque" has been reached, the speed changes to "Downshift speed". Item Parameter Description Pset start torque The Pset start torque is the torque value that must be reached to declare the Pset as started.
Page 12 Operation Tightening status and LED reporting Torque control with angle monitoring Max. torque Target torque Min. torque Downshift torque Pset start torque Angle start Min. angle Max. angle Examples: - Both torque and angle within tolerances will lead to a green LED reporting. - Torque within tolerances and angle below tolerances will lead to red + yellow status (red LED).
Page 13: Results Monitoring
Operation How to read the tightening report LED color Description Action to do Green Accept report None Yellow Incomplete rundown Tighten again. Yellow and red (orange) Reject report Loosen and tighten again. Above max. limits Remove and replace the fastener. How to reverse the rotation Run reverse button Press this button.
Page 14 Operation Launch CVI MONITOR to collect and display the last 100 results. Refer to the user manual of CVIMONITOR available at https://www.desouttertools.com/resource-centre. 14 / 24 06/2020...
Page 15: Service
Service Service Firmware version on tool display The firmware version of the tool is displayed in the menu "Maintenance/Tool". FX.YY.ZZ. Tool information from tool display Go to "Maintenance/Tool" menu to get the following information: Total counter Number of tightenings since the manufacturing of the tool. Battery The current voltage value is displayed.
Page 16: Preventive Maintenance
Service Take into account the following instructions given in the exploded views. Be cautious: when reassembling, tighten the right direction. Left hand thread Right hand thread When reassembling: Apply the recommended glue. Tighten to the required torque. Lubricate with the required grease or oil. Do not apply too much grease on gears or bearings; a thin coat shall be sufficient.
Page 17: Calibration Via Tool Display
This function is set in the "Maintenance" menu. Enter the Maintenance password in the "Configuration" menu. Insert a torque transducer in line with the tool and connect it to any measuring unit from the Desoutter range. Go to "Maintenance/Calibration". Select the number of tightenings required to execute the calibration and press OK.
Page 18: Motor Align
It is mandatory to calibrate the tool equipped with the fixed accessory before use. Upgrading tool firmware Click this icon. Click Upgrade tool firmware. Contact your Desoutter representative to get the last firmware version. Follow the instructions on screen. 18 / 24 06/2020...
Page 19: Troubleshooting
1- The tool tightening counter has been reached. I038 Tool logs 1- Unexpected tool software exception. 2- Log file has been generated by the tool. 3- Contact your Desoutter representative for support. I046 Abnormal battery current 1- Abnormal battery current consumption. Check the Pset settings.
Page 20 2- Check the tool cable is not damaged. W212 Result not stored 1- It is not possible to store the tightening result in the system. 2- Contact your Desoutter representative for support. W216 Current high 1- Maximum current exceeded. 2- Contact your Desoutter representative for support.
Page 21 Procedure E223 Drive init error 1- Software failure. 2- Restart the system. 3- If the problem occurs again, contact your Desoutter representative for support. E227 Motor stalled 1- Motor stalled (could be missing phase, wrong motor tune or power electronics failure) 2- Try once again.
Page 24 Original instructions Founded in 1914 and headquartered in France, Desoutter Industrial Tools is a global leader in electric and pneumatic assembly tools serving a wide range of assembly and manufacturing operations, including Aerospace, Automotive, Light and Heavy Vehicles, Off-Road, General Industry.

This manual is also suitable for:

Eab 26-560 Eab 32-410 Eab 45-330 Eab 50-450 Eab 60-370 Eab 75-300 ... Show all

Desoutter EAB 15-900 Product Instructions

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Desoutter EAB 15-900

Summary of Contents for Desoutter EAB 15-900

This manual is also suitable for:

Table of Contents