Manage Ports & Devices Using Cambrionix Software; Liveviewer - CAMBRIONIX PowerPad8S User Manual

Manage Ports & Devices using Cambrionix Software
5
More productivity, saving you time.
Cambrionix provides three interfaces by which the
PowerPad8S can be monitored and managed:

• LiveViewer

• Cambrionix API
• Command Line Instructions
LiveViewer
5.1
LiveViewer is an App that can be downloaded from
https://hub.cambrionix.com. Once downloaded
and installed on the host computer, LiveViewer
allows you to switch the ports on and off, set the
port to charge only, or to sync mode.
LiveViewer's home page shows the following
information about all the ports:
• Status (attached/disconnected)
• Mode (Charge/Sync/Off)
• Profile (Charging profile)
• Duration (how long the device has been
attached)
• End time (time the battery reaches a threshold
(full) level
• Current (instantaneous charge current in mA)
• Energy (present energy rate in Wh)
Tick boxes adjacent to each port symbol allow
that port mode to be changed. When the port is
in Sync mode, only instantaneous current can be
monitored through LiveViewer. When the port is in
Charge mode, the charge profile, instantaneous
current, energy rate, duration of charge and end
time are displayed.
In addition to individual port information and
control, LiveViewer displays the PowerPad8S
rail voltages, time since switched on, total
instantaneous current and power, and temperature.
Full instructions on LiveViewer are available on our
website.
6 www.cambrionix.com