Related Manuals for DAPAudio EDGE EBS-1 V2
Summary of Contents for DAPAudio EDGE EBS-1 V2
- Page 1 MANUAL ENGLISH EDGE EBS-1 Order code: D1476B Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
EDGE EBS-1 Table of contents Warning ....................................2 Safety Instructions ..............................2 Operating Determinations ............................4 Connection with the Mains ............................. 4 Return Procedure ..............................5 Claims ..................................5 Description of the Device ..............................6 Overview ..................................7 Transmitter (Front/Back) ............................7 Transmitter (Top/Bottom) ............................ -
Page 3: Warning
EDGE EBS-1 Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. - Page 4 EDGE EBS-1 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device. Before using the device, check the regulations regarding the frequency allocation in your country or region.
-
Page 5: Operating Determinations
EDGE EBS-1 Operating Determinations ● This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. ● The maximum ambient temperature t = 40 °C must never be exceeded. ●... -
Page 6: Return Procedure
EDGE EBS-1 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the... -
Page 7: Description Of The Device
EDGE EBS-1 Description of the Device The EDGE EBS-1 is a wireless beltpack system. The set comes with a beltpack transmitter, a receiver, and a headset. The EBS-1 is suitable for both vocal and instrumental applications and can be used only with guitars with an active pickup. -
Page 8: Overview
EDGE EBS-1 Overview Transmitter (Front/Back) Fig. 01 01) Antenna 02) OLED display 03) Power button 04) DOWN button 05) UP button 06) Belt clip Transmitter (Top/Bottom) Fig. 02 07) Mute switch ON/OFF 08) 3-pin mini XLR headset connector OUT 09) IR sensor 10) Battery housing (2 x AA) 11) Lock switch Order code: D1476B... -
Page 9: Receiver (Front)
EDGE EBS-1 Receiver (Front) Fig. 03 12) LCD display 15) IR sensor 13) Control 16) Power button Turn/press this control to select, adjust and Press and hold down this button for 2 seconds to confirm the main menu options. switch the device on/off. 14) Return button Receiver (Back) Fig. -
Page 10: Mounting - Multiple Receivers
EDGE EBS-1 Mounting – Multiple Receivers Step 1 Fig. 06 Step 2 Fig. 07 Step 3 Fig. 08 Order code: D1476B... -
Page 11: Setup Examples
EDGE EBS-1 Setup Examples 4 x EDGE EHS-1 Fig. 09 Order code: D1476B... -
Page 12: Edge Ehs-1
EDGE EBS-1 8 x EDGE EHS-1 Fig. 10 Order code: D1476B... -
Page 13: Setup And Operation
EDGE EBS-1 Setup and Operation Follow the directions below, as they pertain to your preferred operation mode. Before using the device, check the regulations regarding the frequency allocation in your country or region. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Receiver Setup 01) Connect the supplied power adapter to the DC power connector (24) on the rear of the receiver. -
Page 14: Transmitter Setup
EDGE EBS-1 Transmitter Setup Install the beltpack on your belt by means of the belt clip (06). Example 1 – Headset Fig. 12 Example 2 – Electric Guitar Fig. 13 Belt Clip Orientation Fig. 14 For best performance and comfort, you can mount the belt clip in 2 different ways. The best results can be reached with the antenna pointing upwards. -
Page 15: Control Panel
EDGE EBS-1 Control Panel A) Antenna signal B) AF signal mute C) Receiver lock D) Transmitter battery status E) Group (A–J) F) Channel (1–14) G) Receiver frequency H) Squelch I) Device name J) User color K) High-pass filter status L) AF signal strength M) Wireless signal strength Fig. -
Page 16: Compensation Of Interference With Balanced Connections
EDGE EBS-1 Compensation of Interference with Balanced Connections Main Menu Options 01) Upon start-up, the display will show the DAP Audio logo. After 2 seconds, the display will show the current device status. 02) Press the control (13) to open the main menu. The display will show: 03) Turn the control (13) to toggle through the following 14 menus: ●... -
Page 17: Group
EDGE EBS-1 ● SYNC ● LOCK ● TX GAIN ● RX GAIN ● LOW CUT ● SQUELCH ● TONE KEY ● COLOR ● NAME ● ANT DC 04) Press the control (13) to open the desired menu. 1. Group In this menu you can set the desired group. Each group (A–J) has a unique set of channels with 14 fixed frequencies per channel. -
Page 18: Freq
EDGE EBS-1 [1]:606.000MHz [1]:606.200MHz [1]:606.225MHz [1]:606.300MHz [1]:606.425MHz [2]:608.025MHz [2]:608.225MHz [2]:607.250MHz [2]:607.325MHz [2]:607.450MHz [3]:610.325MHz [3]:610.525MHz [3]:608.475MHz [3]:608.550MHz [3]:608.675MHz [4]:612.900MHz [4]:613.100MHz [4]:609.925MHz [4]:610.000MHz [4]:610.125MHz [5]:615.750MHz [5]:615.950MHz [5]:611.600MHz [5]:611.675MHz [5]:611.800MHz [6]:618.875MHz [6]:619.075MHz [6]:614.050MHz [6]:614.125MHz [6]:614.250MHz [7]:622.275MHz [7]:622.475MHz [7]:617.375MHz [7]:617.450MHz [7]:617.575MHz [8]:626.050MHz [8]:626.250MHz [8]:620.275MHz [8]:620.350MHz [8]:620.475MHz [9]:631.200MHz... -
Page 19: Scan
EDGE EBS-1 4. Scan In this menu you can automatically scan the entire frequency range, in order to find and choose the unused frequency. By doing so, you can avoid signal distortion. 01) Turn the control (13) until the display shows: 02) Press the control (13) to enter. -
Page 20: Lock
EDGE EBS-1 6. Lock In this menu you can lock the receiver’s display. 01) Turn the control (13) until the display shows: 02) Press the control (13) to edit. 03) Turn the control (13) to select ON or OFF. 04) Press the control (13) to confirm. 05) If you have chosen ON, the display will be locked. -
Page 21: Low Cut
EDGE EBS-1 9. Low Cut In this menu you can set the high-pass filter. The high-pass filter removes low frequency signals picked up by the transmitter. 01) Turn the control (13) until the display shows: 02) Press the control (13) to edit. 03) Turn the control (13) to select ON or OFF. -
Page 22: Color
EDGE EBS-1 12. Color In this menu you can set the receiver’s color. It is useful when working with multiple receivers and transmitters. 01) Turn the control (13) until the display shows: 02) Press the control (13) to edit. 03) Turn the control (13) to select one of the 8 colors (red, yellow, green, blue, orange, brown, white, black). -
Page 23: Ant Dc
EDGE EBS-1 14. Ant Dc In this menu you can set the antenna input/output power supply. 01) Turn the control (13) until the display shows: 02) Press the control (13) to edit. 03) Turn the control (13) to select ON or OFF. 04) Press the control (13) to confirm. -
Page 24: Transmitter
EDGE EBS-1 Transmitter 01) Press and hold down the power button (03) for 2 seconds to switch the transmitter ON/OFF. 02) Upon start-up, the display will show the following splash screen: Mute 01) Move the mute switch (07) to ON, to mute the transmitter. 02) Move the mute switch (07) to MUTE, to deactivate mute. - Page 25 EDGE EBS-1 05) Press the power button (03) to save changes. The display will show: 06) Press the UP/DOWN buttons (04/05) to set the desired RF power. Select one of the 3 options: ● LOW (10 mW) ● MID (20 mW) ●...
-
Page 26: Connection Cables
EDGE EBS-1 Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables. -
Page 27: Maintenance
EDGE EBS-1 Maintenance The DAP Audio EDGE EBS-1 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. -
Page 28: Approval
EDGE EBS-1 Approval The DAP Audio EDGE EBS-1 is a Class 2 wireless audio device (Commission Decision 2000/299/EC). Frequency range: 606–668 MHz Exclusion of liability The frequency ranges available for wireless microphones differ per country and region. Consult the respective national and/or regional authorities as licensing or specific restrictions may apply for the use of the device. -
Page 29: Product Specifications
EDGE EBS-1 Spectrum authorities in the EFTA countries: Iceland Post and Telecom Administration www.pfs.is Liechtenstein Amt für Kommunikation www.llv.li Norway Norwegian Communications Authority www.nkom.no Switzerland Federal Office of Communications www.bakom.admin.ch Spectrum authorities in the EU candidate countries: Montenegro Agency for Electronic Communications and Postal www.ekip.me Services Republic of North... -
Page 30: Dimensions
EDGE EBS-1 Dimensions Order code: D1476B... - Page 31 EDGE EBS-1 Order code: D1476B...
- Page 32 ©2020 DAP Audio...