Page 2
Congratulations! You have bought a great, innovative product from DAP Audio. DAP Audio COM-54 brings excitement to any venue. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry.
DAP Audio DAP Audio COM-54 Product Guide ™ Warning..…...................………………………………………………………… Safety-instructions………………………………………………………………………………………...……………..… Operating Determinations………………………………………………………………………………………….…..Description..…................……….…………………………….…………………… Features………………………………………………………………………………….……………………………….….. Overview ..…………………………………………………………………………………….………....…..… Frontside.………………………………………………………………………….………..……………………………..Backside.………………………………………………………………………….………..…………………………..….. Installation................…...……………………………………………..……..….. Set Up and Operation..............……..……………………….……………….….….. Set Up ………………..........…………………………………........………..Menu Options…................……….…………………………………….…………. Volume Set Menu.…………………………………………………………………….…………………………….….….. Sensitivity Adjustment Menu (SQUELCH).……………………………………………….……………………..…….. Signal Channel solution Menu.……………………………………………….………..…………………….………… Frequency Set Menu.….……………………………………………………….………..……………………….…..….
WARNING CAUTION! Keep this device away from rain and moisture! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires! Before your initial start-up, please make sure that there is no damage caused by transportation.
Make sure that the power-cord is never crimped or damaged. Check the system and the power- cord from time to time. In system setup, the amplifier's output power must be 50%-100% more than the loaded loudspeakers rated power. Please turn off the power switch, when changing the power cord or signal cable, or select the input mode switch.
Description of the device Features The Com-54 is a 4 channel Wireless Microphone Set from Dap Audio. • 2 Frequency ranges available: 785-811 MHz: ordernr: D141479 822-846 MHz: ordernr: D141482 • 4 channel wireless microphone system • True diversity receiver •...
16) Fan Installation Remove all packing materials from the Com-54. Check that all foam and plastic padding is removed. Put the 2 antennas into socket A and B at the backside in a vertical angle. Remove the rubber protection caps at the underside of the microphones that covers the recharge inputs (See Fig 4).
Do not attempt to operate a 120V specification product on 230V power, or vice versa. Press the powerswitch to turn the COM-54 on. Turn volume down, by pressing SET. The display shows AF out, then the display shows VR1. Adjust the Functions to the desired position.
Press UP/DOWN to change the settings. After changing the settings, please press the SET button to confirm. Otherwise it won’t effect and the system will remain in the precious state. When you have selected a new channel or frequency and you haven’t pressed SET, the LCD will flash to remind you.
System Lock Menu If the receiver is locked, the menu settings (Channels, Sensitivity, Indicator Solution and Power switch) cannot be changed. If the receiver is in unlocked status LOC OFF, you can change all the menu functions. Note: Which screen is shown, depends on your previous setup LOCK OFF to LOCK ON Scroll through the menu by using the SET button, until the LCD shows: after a second the display shows:...
Microphone Power LED LCD screen 3) SET-button; Press this button to scroll through the menu and/or confirm your settings. 5) Down ON / OFF Insert / Replace Batteries 1. Slide the small cap on the back of the microphone down. 2.
Microphone Charger Charge time: between 1,5 – 8 hours. When using for the first time, please charge min. 12 hours. If the batteries are charging, the indicator LED will be RED. When the batteries are fully charged, the indicator Led will be GREEN. When the LED flashes there is an error.
Vestastraat 2 6468 EX Kerkrade Nederland declare under our sole responsibility that the product: product COM-54 4Ch Wireless Mic785-811 model number D141479 to which this declaration relates in conformity with the following European, harmonised and published standards at date of this...
Page 16
Vestastraat 2 6468 EX Kerkrade Nederland declare under our sole responsibility that the product: product COM-54 4Ch Wireless Mic822-846 model number D141482 to which this declaration relates in conformity with the following European, harmonised and published standards at date of this...
Connection Cables Take care of the connector cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to your advantage. Periodically check that your cables are in good condition, that they are correctly wired and that all their contacts are perfectly efficient: a great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
Maintenance DAP Audio COM-54 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.