Subscribe to Our Youtube Channel
Related Manuals for DAPAudio COM-2.4
Summary of Contents for DAPAudio COM-2.4
- Page 1 MANUAL ENGLISH COM-2.4 Ordercode: D1410 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Receiver controls and functions ..........................6 Front Panel Controls and Functions........................6 Rear Panel................................... 7 Controls and Functions............................. 7 COM-2.4 transmitter battery selection and installation..................8 Pairing Instructions ................................ 8 Specifications ..................................9 Notes ....................................10 Order code: D1410... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Wireless Microphone COM-2.4 Receiver DW24R ... -
Page 4: Operating Determinations
COM-2.4 Never leave any cables lying around. Do not open the device and do not modify the device. Do not insert objects into air vents. Do not connect this device to a dimmer pack. Do not switch the system on and off in short intervals, as this would reduce the system’s life. -
Page 5: Claims
COM-2.4 Claims The client has the obligation to check the delivered goods immediately upon delivery for any short- comings and/or visible defects, or perform this check after our announcement that the goods are at their disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be reported to the carrier upon receipt of merchandise. -
Page 6: Set Up And Operation
Keep the receiver antenna away from noise sources such as other digital equipment, microwave ovens, as well as large metal objects. Keep COM-2.4 receiver 9 meters away from wireless access points . -
Page 7: Receiver Controls And Functions
Antenna: Position the antenna vertically Volume knob Adjust the volume Indicate pairing status: on = connected with COM-2.4 transmitter off = not connected with any device blinking = in pairing status Pair button Indicate the receiver is on by lightening ... -
Page 8: Rear Panel
Unbalanced 1/4" TRS phone audio output jack Controls and Functions. Power/Pair button Power on/off the COM-2.4 by pressing and holding it for about 0.5 seconds Pair the transmitter and receiver by pressing and holding it for about 5 seconds LED indicator: on = the COM-2.4 is on or/ and in pair... -
Page 9: Com-2.4 Transmitter Battery Selection And Installation
Power on the COM-2.4 receiver and COM-2.4 handheld digital wireless, press and hold the pair button simultaneous for about 5 seconds The LED of the COM-2.4 and the volume circle of the COM-2.4 will blink to show they are in pairing status. After the pairing is successful both indicators will light constantly. -
Page 10: Specifications
COM-2.4 Specifications COM-2.4 Receiver Frequency 2.404 - 2.476GHz RF Sensitivity -78dBm Transmission Distance > 25m (distance insight) Frequency Response 50Hz - 18KHz (16bit - 38.4KHz) Distortion 0.05@1KHz >89dB Transmission Delay 18ms Power Supply DC12V=200mA COM-2.4 Transmitter Carrier Frequency 2.404 - 2.476GHz... -
Page 11: Notes
COM-2.4 Notes Order code: D1410... - Page 12 ©2013 DAP Audio...
Need help?
Do you have a question about the COM-2.4 and is the answer not in the manual?
Questions and answers