Hide thumbs Also See for IEM-100:

Advertisement

IEM-100 Beltpack
ORDERCODE D147173
D147182

Advertisement

Table of Contents
loading

Summary of Contents for DAPAudio IEM-100

  • Page 1 IEM-100 Beltpack ORDERCODE D147173 D147182...
  • Page 2 Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio IEM-100 brings excitement to any venue. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry.
  • Page 3: Table Of Contents

    DAP Audio DAP Audio IEM-100™ Product Guide Warning..................................Unpacking Instructions............................Safety-instructions..............................Operating Determinations............................. Return Procedure..............................Claims..................................Description..................................Features..................................Overview.................................. Set Up and Operation..............................Battery installation..............................Receiver Control..............................Adjusting the squelch threshold..........................Tips for achieving maximum performance......................Approval..................................Declaration of conformity............................
  • Page 4: Warning

    WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! UNPACKING INSTRUCTIONS Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
  • Page 5: Operating Determinations

     If system is dropped or struck, switch of the unit immediately. Have a qualified engineer inspect for safety before operating.  If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your system. Leave the system switched off until it has reached room temperature.
  • Page 6: Description

    Description of the device Features The IEM-100 Beltpack is a Wireless In Ear Monitor Receiver from Dap Audio. • UHF-band PLL Synthesized design. • Frequency agility over a 25MHz bandwith, with 48 pre-programmed frequencies avaiable. • Built-in limiter circuitry eliminates distortion under excessive input levels.
  • Page 7: Set Up And Operation

    Set Up and Operation Before opating the unit make sure the batteries are inserted. Receiver Battery Installation Fig. 2 Press the battery compartment door Install the batteries. And slide the cover in the direction As shown in Figure 2. Receiver control ...
  • Page 8 Receiver Setting Press the SET button to switch between MIX, LIM, SQL and EQ.  MIX/ Stereo Output Setting: Use the SET button until MIX is flashing( see Figure 9). Use the Up or Down button to switch the MIX function on or off. Means MIX mode is selected.
  • Page 9  Equalizer Setting: Press the SET button until EQ is flashing (Figure 12). Use the Up or Down button to adjust the Audio Balance. Fig. 8 Note: If no button is pressed for 3 seconds, the system will automaticly exit the setting state and save the current setting.
  • Page 10: Adjusting The Squelch Threshold

    Mix Mode In Mix mode the 1/L and 2/R signals are mixed into a mono signal using the balance knob. The mono signal is sent to headphone L and headphone R. See Figure 15. Fig. 11 Mono Mode Used when only one (mono) monitor mix is available. Adjusting the squelch threshold Interference due to other transmission links can be eliminated as follows: ...
  • Page 11: Approval

    Approval The DAP D147179 and 147182 are Class II wireless devices. D147179: 790-811 MHz for use in: Belgium, Czech Republic, Denmark, France, Germany, Greece, Hungary, Italy, Luxemburg, Norway, Poland, Portugal, Romania, Slovakia, Sweden, Switzerland, Turkey, United Kingdom. D147182: 822-846 Mhz for use in: Czech Republic, Denmark, France, Germany, Greece, Hungary, Italy, Luxemburg, Netherlands, Poland, Portugal, Romania, Slovakia, Sweden, Switzerland, United Kingdom.
  • Page 12: Declaration Of Conformity

    CERTIFICATE OF CONFORMITY This certifies that the following designated product: Name: Belt pack In Ear Monitoring UHF PLL 790-814MHz Model No.: D147179 Brand Name: DAP AUDIO (Product Identification) Authorized by the European Union to act as Conformity Assessment Body in accordance with the R&TTE Directive 1999/5/EC : EN 301 489-1/-9 Radio : EN 300 422-1/-2 Safety : EN 60065+A1...
  • Page 13 CERTIFICATE OF CONFORMITY This certifies that the following designated product: Name: Belt pack In Ear Monitoring UHF PLL 822-846MHz Model No.: D147182 Brand Name: DAP AUDIO (Product Identification) Authorized by the European Union to act as Conformity Assessment Body in accordance with the R&TTE Directive 1999/5/EC : EN 301 489-1/-9 Radio : EN 300 422-1/-2 Safety : EN 60065+A1...
  • Page 14: Connection Cables

    Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
  • Page 15: Maintenance

    Maintenance The DAP Audio IEM-100 beltpack requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.
  • Page 16: Product Specifications

    Product Specification Model: DAP Audio IEM-100 Receiver Frequency range: 710 – 846 MHz Bandwidth: 25MHz Max. deviation range: 68kHz S/N Ratio: 94dB Sensitivity: -107dBM T.H.D.: <1% Headphone impedance: 16Ω Headphone output level: 2 x 50mW Frequency response: 80-15.000Hz Stereo separation: 35dB Output Jack: 3.5mm stereo jack...
  • Page 17 2010 Dap Audio.

This manual is also suitable for:

Iem-100 beltpack

Table of Contents