Save the carton and all packing materials. In the event that a device must be returned to the factory, it is important that the device is returned in the original factory box and packing. Your shipment includes: ● DAP Audio EDGE EHS-1 or EDGE EBS-1 (receiver/microphone/beltpack) ● DC power adapter ●...
Page 4
EDGE EHS-1/EDGE EBS-1 IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device. Before using the device, check the regulations regarding the frequency allocation in your country or region.
EDGE EHS-1/EDGE EBS-1 Operating Determinations ● This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. ● The maximum ambient temperature t = 40 °C must never be exceeded.
EDGE EHS-1/EDGE EBS-1 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Description of the Device The EDGE EHS-1 is a wireless handheld system. The set consists of a handheld transmitter and a receiver. The EDGE is suitable for voice transmission. The transmitter is powered by two AA 1,5 V batteries (not included).
EDGE EHS-1/EDGE EBS-1 Overview Receiver (Front) Fig. 01 01) LCD display 02) Control Turn/press this control to select, adjust and confirm the main menu options. 03) Return button 04) IR sensor 05) Power button Press and hold down this button for 2 seconds to switch the device on/off.
EDGE EHS-1/EDGE EBS-1 Microphone Fig. 03 15) Microphone head 16) OLED display 17) Power button ● While in main menu, press the button to confirm your choice and return to the start screen. ● Press and hold down this button for 3 seconds to switch the microphone ON/OFF.
EDGE EHS-1/EDGE EBS-1 Installation Remove all packing materials from the EDGE EHS-1 + EDGE EBS-1. Check if all foam and plastic padding is removed. Secure the equipment into a 19" rack if preferred. Connect the receiver to a power outlet with the supplied DC power adaptor.
EDGE EHS-1/EDGE EBS-1 Setup and Operation Follow the directions below, as they pertain to your preferred operation mode. Before using the device, check the regulations regarding the frequency allocation in your country or region. Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
EDGE EHS-1/EDGE EBS-1 Beltpack Setup Install the beltpack on your belt by means of the belt clip (29). Example 1 – Headset Fig. 13 Example 2 – Electric Guitar Fig. 14 Order code: D1475B/D1476B...
EDGE EHS-1/EDGE EBS-1 Control Panel A) Antenna signal B) AF signal mute C) Receiver lock D) Transmitter battery status E) Group (A–J) F) Channel (1–14) G) Receiver frequency H) Squelch I) Device name J) User color K) High-pass filter status...
EDGE EHS-1/EDGE EBS-1 Inserting the Batteries (Beltpack) Fig. 17 01) Open the battery housing (33). 02) Insert the batteries into the battery housing (33). The transmitter operates with two AA1,5 V batteries. While inserting the batteries, mind their polarity. 03) Close the battery housing (33).
EDGE EHS-1/EDGE EBS-1 Main Menu Options (Receiver) 01) Upon start-up, the display will show the DAP Audio logo. After 2 seconds, the display will show the current device status. 02) Press the control (02) to open the main menu. The display will show: 03) Turn the control (02) to toggle through the following 14 menus: ●...
EDGE EHS-1/EDGE EBS-1 1. Group In this menu you can set the desired group. 01) Turn the control (02) until the display shows: 02) Press the control (02) to edit. 03) Turn the control (02) to select the desired group. The adjustment range is A–J.
EDGE EHS-1/EDGE EBS-1 4. Scan In this menu you can automatically scan the entire frequency range, in order to find and choose the unused frequency. By doing so, you can avoid signal distortion. 01) Turn the control (02) until the display shows: 02) Press the control (02) to enter.
EDGE EHS-1/EDGE EBS-1 6. Lock In this menu you can lock the receiver’s display. 01) Turn the control (02) until the display shows: 02) Press the control (02) to edit. 03) Turn the control (02) to select ON or OFF.
EDGE EHS-1/EDGE EBS-1 9. Low Cut In this menu you can set the high-pass filter. The high-pass filter removes low frequency signals picked up by the transmitter. 01) Turn the control (02) until the display shows: 02) Press the control (02) to edit.
EDGE EHS-1/EDGE EBS-1 12. Color In this menu you can set the receiver’s color. It is useful when working with multiple receivers and transmitters. 01) Turn the control (02) until the display shows: 02) Press the control (02) to edit.
EDGE EHS-1/EDGE EBS-1 Main Menu Options (Microphone) 01) Turn the battery cover (18) of the microphone counter-clockwise to loosen it. 02) Remove the battery cover. 03) Press and hold down the power button (17) for 3 seconds to switch the microphone ON/OFF.
EDGE EHS-1/EDGE EBS-1 1. Group In this menu you can set the desired group. 01) Press the UP/DOWN buttons (19/20) until the display shows: 02) Press the SET button (21) to edit. 03) Press the UP/DOWN buttons (19/20) to select the desired group. The adjustment range is A–J.
EDGE EHS-1/EDGE EBS-1 4. Gain In this menu you can set the transmitter gain. 01) Press the UP/DOWN buttons (19/20) until the display shows: 02) Press the SET button (21) to edit. 03) Press the UP/DOWN buttons (19/20) to set the desired gain. The adjustment range is from -32 dB to +4 dB.
EDGE EHS-1/EDGE EBS-1 Main Menu Options (Beltpack) 01) Press and hold down the power button (26) for 2 seconds to switch the beltpack ON/OFF. 02) Upon start-up, the display will show the following splash screen: Mute 01) Move the mute switch (34) to MUTE, to mute the beltpack.
EDGE EHS-1/EDGE EBS-1 Connection Cables Take care of your cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability. Periodically check your cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
EDGE EHS-1/EDGE EBS-1 Maintenance The DAP Audio EDGE EHS-1 + EDGE EBS-1 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.
EDGE EHS-1/EDGE EBS-1 Approval The DAP Audio EDGE EHS-1 + EDGE EBS-1 are Class 2 wireless audio devices (Commission Decision 2000/299/EC). Frequency range: 606–668 MHz Exclusion of liability The frequency ranges available for wireless microphones differ per country and region. Consult the respective national and/or regional authorities as licensing or specific restrictions may apply for the use of the device.
Page 32
EDGE EHS-1/EDGE EBS-1 Spectrum authorities in the EFTA countries: Iceland Post and Telecom Administration www.pfs.is Liechtenstein Amt für Kommunikation www.llv.li Norway Norwegian Communications Authority www.nkom.no Switzerland Federal Office of Communications www.bakom.admin.ch Spectrum authorities in the EU candidate countries: Montenegro Agency for Electronic Communications and Postal www.ekip.me...
EDGE EHS-1/EDGE EBS-1 Product Specifications Model: DAP Audio EDGE EHS-1 + EBS-1 Power supply: DC 12–15 V, 300 mA Dimensions (microphone): Ø51 mm x 255 mm (WxH) Dimensions (beltpack): 63 x 21 x 215 mm (LxWxH) Dimensions (receiver): 205 x 170 x 263 mm (LxWxH)