Steps
1. Place the battery on the palm-rest and keyboard assembly.
2. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
3. Replace the three screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Wireless card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the WLAN card and provides a visual representation of the removal procedure.
32
Removing and installing components
After working inside your
computer.
Before working inside your
computer.