Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell G3 3500 Service Manual

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the memory module.
4. Remove the WLAN card.
5. Remove the solid-state drive in M.2 slot
6. Remove the solid-state drive in M.2 slot
7. Remove the battery.
8. Remove the display assembly.
9. Remove the coin-cell battery.
10. Remove the left fan.
11. Remove the right fan.
12. Remove the heat sink.
13. Remove the speakers.
14. Install the I/O board.
15. Remove the power-adapter
16. Remove the system board.
NOTE: The system board can be removed along with the heat sink.
17. Remove the touchpad.
18. Remove the fingerprint
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
Before working inside your
one.
two.
port.
reader.
computer.
Removing and installing components 55