TEXI Treccia & Treccia C Matic operation manual
18. SPREADER
When Spreader (A) moves from right to the left , clearance should be about 0,5 ~0,8 mm between left needle and tip (a) of
thread hooking point. When it comes to the extreme left, the clearance between the center of the left needle and tip (a) of
thread hooking point should be 4,5 ~5,5 mm (Fig. 22).
Adjust the height of Spreader (A) above the stitch palte to 9 ~11 mm (Fig. 23).
To adjuct the Spreader loose screw (B) and ( C) (Fig. 24).
19. THREADING DIAGRAM
7